Pump Details:
- Voltage: 24v DC
- Power: 280w
- Max Head Height: 30m
- Max Flow: 2m^3/h
- Outlet size: 25mm (1in)
- Outlet material: Brass
- Length of supplied cable: 2m
- Model: DQB2-30-24-280
- Permanent magnet DC brushless synchronous motor, designed for solar, with 15-20% efficiency improved.
- Alloy mechanical seal: Longer working life and high reliability.
- Intelligent water shortage protection: The pump stops working automatically when there is no water in the well, and automatically start working 15-30 minutes later.
Controller Details:
- Max Voc: 50v
- Max Isc: 17a
- Model: WBS 72V/110V/150V/200V/300V Solar DC Controller (Model depending on pump purchased)
- Auto-restart: When there’s enough power, the controller will start the pump automatically
- High waterproof grade: IP65, double seal effect in waterproof and leak-proof
- Soft start technology: No impulse current, longer life for the pump motor.
- High voltage/Low voltage/Over-current/High temperature protection
What’s included in the crate:
- 1x Solar surface pump with 2m of cable
- 1x Pump controller with MPPT function
- 1x Stainless steel float switch (sensor for the tank)
- 1x Pump outlet joint connector
- 1x Splice kit for cable join
- 1x Splice kit for waterproof
Additional Required parts (NOT Included with this package):
- Suitable solar panels. There are some suggestions in the instruction book.
- A stainless steel wire (called safety cable) to hold the pump in the bore. If pumping water from the dam or river, a float set up required.
- A poly pipe from the pump to the water tank. (recommend 40mm or over diameter poly pipe)
- Wire power cable (3 wires plus earth). we recommend cable size at least thicker than the original cable in the pump.
