Inverter/Charger with GX inside
The MultiPlus-II GX is an Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
Â
A MultiPlus-II with LCD and GX functionality
The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
Â
GX Device Inbuilt
The integrated GX device includes:
- A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery.
- A USB port.
- A Ethernet port.
- A VE.Direct port.
Â
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
Â
Applications
The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Â
Parallel and three phase operation
Only one GX unit is needed in case of Parallel and three phase operation.
Â
Â
The basics of using VE Configure
Â
| MultiPlus-II GX | 24/3000/70-32 | 48/3000/35-32 | 48/5000/70-50 |
| PowerControl & PowerAssist | Yes | ||
| Transfer switch | 32A | 50A | |
| Maximum AC input current | 32A | 50A | |
| Auxiliary output | Yes (32A) | ||
| INVERTER | |||
| DC Input voltage range | 19 – 33V | 38 – 66V | |
| Output | Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1%  (1) |
||
| Cont. output power at 25°C  (3) | 3000VA | 5000VA | |
| Cont. output power at 25°C | 2400W | 4000W | |
| Cont. output power at 40°C | 2200W | 3700W | |
| Cont. output power at 65°C | 1700W | 3000W | |
| Maximum apparent feed-in power | 2500VA | 4000VA | |
| Peak power | 5500W | 9000W | |
| Maximum efficiency | 94% | 95% | 96% |
| Zero load power | 13W | 11W | 18W |
| Zero load power in AES mode | 9W | 7W | 12W |
| Zero load power in Search mode | 3W | 2W | 2W |
| CHARGER | |||
| AC Input | Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz |
||
| Charge voltage ‘absorption’ | 28,8V | 57,6V | |
| Charge voltage ‘float’ | 27,6V | 55,2V | |
| Storage mode | 26,4V | 52,8V | |
| Maximum battery charge current (4) | 70A | 35A | 70A |
| Battery temperature sensor | Yes | ||
| GENERAL | |||
| Interfaces | VE.Can, USB, Ethernet, VE.Direct, Wi-Fi | ||
| External AC current sensor (optional) | 50A | 100A | |
| Programmable relay  (5) | Yes | ||
| Protection  (2) | a – g | ||
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration | ||
| General purpose com. port | Yes, 2x | ||
| Remote on-off | Yes | ||
| Operating temperature range | -40 to +65°C (fan assisted cooling) | ||
| Humidity (non-condensing) | max 95% | ||
| ENCLOSURE | |||
| Material & Colour | Steel, blue RAL 5012 | ||
| Protection category | IP22 | ||
| Battery-connection | M8 bolts | ||
| 230 V AC-connection | Screw terminals 13 mm² (6 AWG) | ||
| Weight | 19 kg | 30 kg | |
| Dimensions (hxwxd) mm | 506 x 275 x 147 | 565 x 323 x 148 | |
| STANDARDS | |||
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2 |
||
| Emission, Immunity | EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
||
| Uninterruptible power supply | IEC 62040-1 | ||
| Anti-islanding | Please consult the certificates on our website. | ||
| 1) Can be adjusted to 60 Hz                 3) Non-linear load, crest factor 3:1 2) Protection key:                         4) At 25°C ambient a) output short circuit                      5) Programmable relay which can be set for general alarm, DC b) overload                                                               under voltage or genset start/stop function. c) battery voltage too high                                   AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to d) battery voltage too low                                    60VDC e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high |
|||
| SKU | 3243 |
| Model # | PMP482506000 |
| Barcode # | 8719076048824 |
| Brand | Victron Energy |
| Shipping Weight | 31.3000kg |
| Shipping Width | 0.655m |
| Shipping Height | 0.255m |
| Shipping Length | 0.415m |
| Shipping Cubic | 0.072072000m3 |
Reviews
There are no reviews yet.