The Victron SmartShunt is a powerful battery monitor with Bluetooth on board. It can be installed out of sight, behind the scenes – whilst live data from the device is relayed to your mobile phone or tablet via the VictronConnect App for Android or iOS or on your Mac and PC. The SmartShunt is a great alternative for a BMV battery monitor where a separate display isn’t required.
The SmartShunt can do more than comprehensively monitor your main battery bank – additionally you can choose to either:
Monitor the voltage of a second battery, for exmaple the starter battery or;
Connect a temperature sensor (optional accessory) for temperature compensated charging or;
Monitor the midpoint voltage of your battery bank (cable included) to keep an eye on battery health.
Connection to any Victron GX Device
The SmartShunt also features a VE.Direct port so can also be connected to any device in the GX range including the Colour Controller and Cerbo GX via a VE.Direct cable.
Differences compared to BMV-712 Battery Monitor
No programmable visual and audible alarm
No programmable relay.
Smartshunt Video Overview
How to set up a Victron BMV/SmartShunt Battery Monitor for lead and lithium batteries
SmartShunt
300 A / 500 A / 1000 A / 2000 A
Supply voltage range
6,5 – 70 VDC
Current draw
< 1mA
Input voltage range, auxiliary battery
6,5 – 70 VDC
Battery capacity (Ah)
1 – 9999 Ah
Operating temperature range
-40 +50°C (-40 – 120°F)
Measures voltage of second battery, or temperature, or midpoint
Yes
Temperature measurement range
-20 +50°C
VE.Direct communication port
Yes
RESOLUTION & ACCURACY
Current
± 0,1A
Voltage
± 0,01V
Amp hours
± 0,1 Ah
State of charge (0 – 100%)
± 0,1%
Time to go
± 1 min
Temperature (0 – 50°C or 30 – 120°F)
± 1°C/°F
Accuracy of current measurement
± 0,4%
Offset
Less than 10 / 10 / 20 / 40 mA
Accuracy of voltage measurement
± 0,3%
INSTALLATION & DIMENSIONS
Dimensions (h x w x d)
300 A: 44 x 120 x 44 mm
500 A: 46 x 120 x 54 mm
1000 A: 68 x 168 x 75 mm
2000 A: 68 x 168 x 100 mm
Shunt connection bolts
300 A: M8
500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Two 1.5 m cables with 1 A fuse, for ‘+’ connection and starter battery or midpoint connectionAnd a 1.5 m cable with a VE.Direct socket. Note that a (not included) VE.Direct cable is needed to connect a GX device.
Temperature sensor
Optional (ASS000100000)
A note regarding the range of the Bluetooth signal
The shunt and the electric cables do negatively influence the range of the Bluetooth signal. The resulting range of 10-15 meter is however satisfactory in most cases.
The proximity of other electrically conducting elements, such as the metal chassis of a vehicle or seawater around the hull if a boat, may reduce the range of the Bluetooth signal to an unacceptable level. The solution in such a case is to add a VE.Direct Bluetooth Dongle (ASS030536011) to the system, and to switch off Bluetooth in the SmartShunt.
STORED TRENDS
Data stored
Battery voltage, Current, State of Charge % as well as the Aux input (Battery temperature, or midpoint deviation, or starter battery voltage).
Reviews
There are no reviews yet.