Massive off-grid solar warehouse in Welshpool - open to the public 6 days - have a sneak peek with google maps

Victron BatteryProtect 12/24V-100A

$88.70

Warehouse WA: 0
Welshpool WA: 1

Description

The Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

BatteryProtect 100A Features:

12/24V Auto Ranging
The BatteryProtect automatically detects system voltage

Programming made easy
The BatteryProtect can be set to engage / disengage at several different voltages. the seven segment display will indicate which setting has been chosen.

A special setting for Li-ion batteries
In this mode the BatteryProtect can be controlled by the VE.Bus BMS. Note: the BatteryProtect can also be used as a charge interrupter in between a battery charger and a Li-ion
battery. See connection diagram in the manual.

Ultra low current consumption
Uses only 1.5ma when on and when off or due to low voltage shutdown uses only 0.6ma. This is important in case of Li-ion batteries, especially after low voltage shutdown

Over voltage protection
To prevent damage to sensitive loads due to over voltage, the load is disconnected whenever the DC voltage exceeds 16V (12V setting) and 32V (24V setting)

Ignition proof
The unit doesn’t use relays but MOSFET switches instead, and therefore no sparks.

Delayed alarm output
The alarm output is activated if the battery voltage drops below the preset disconnect level during more than 12 seconds. Starting the engine will therefore not activate the alarm. The alarm output is a short circuit proof open collector output to the negative (minus) rail, max. current 50 mA. The alarm output is typically used to activate a buzzer, LED or relay.

Delayed load disconnect and delayed reconnect
The load will be disconnected 90 seconds after the alarm has been activated. If the battery voltage increases again to the connect threshold within this time period (after the engine has been started for example), the load will not be disconnected. The load will be reconnected 30 seconds after the battery voltage has increased to more than the preset reconnect voltage.

 

Product Video – Introduction to the Victron Energy BatteryProtect

 

Product Video – How to program the BatteryProtect

 

SKU 3470
Model # BPR000100400
Barcode # 8719076021438
Brand Victron Energy
Shipping Weight 0.5350kg
Shipping Width 0.190m
Shipping Height 0.070m
Shipping Length 0.070m
Shipping Cubic 0.093100000m3
Additional information
Weight 0.54 kg
Dimensions 7 × 19 × 7 cm
Voltage

Current

Brand

Reviews (0)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Scroll To Top
Close
Close
Shop
0 Cart

Shopping Cart

Close

Shopping cart is empty!

Continue Shopping