Your cart is currently empty!
Amptron BluEdge LCD 2.4-inch full-colour RS485 BMS display
$169.00
The Amptron BluEdge colour display with built-in audible alarm.
This handy little unit connects to any Amptron BluEdge Battery bank to display key battery system status & data.
With a Preset capacity value range from 0.1Ah to 999Ah
This information includes:
This handy little unit connects to any Amptron BluEdge Battery bank to display key battery system status & data.
With a Preset capacity value range from 0.1Ah to 999Ah
This information includes:
- SOC (State of charge %)
- Battery Voltage
- Current draw in Amps & Watts
- Battery Temperature
- Battery used cycle
- and more!
- The display also supports presenting consolidated data of a parallel connected battery bank for models that support parallel communication.
Available on back-order
Description
Quick and easy setup to display key battery information such as State of Charge (both % and Ah), Voltage, Current draw, Temperature, Cycles etc.
Suitable for compliance with AS/NZS 3001.2:2022 and AS/NZS 3004.2:2014 standards.
Built-in audible alarm that will trigger on adverse battery conditions prior to battery shut-down.
Conveniently view battery alarm codes.
View consolidated battery information for a bank / group of connected BluEdge batteries in one convenient display (for models that supports parallel communication).
For the 24V, 36V and 48V batteries – dive down into cell voltage data for each connected battery in the group.
Easy fixing with flexible flush mounted design and range extendable via common UTP network cables.
Please note, the display unit requires a compatible communications adapter cable to connect to a battery. Refer to the table below for the compatible cable for each battery model.
| Battery model | Communication cable adapter required for display | Parallel communication supported? |
| AT-LFP-12-100-BTC-BV10 | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 4 batteries |
Specifications
| Specification |
Description/Remark
|
|
|
Model
|
AT-BMSMON-2.4-COL-RS485-AV01
|
BluEdge LCD 2.4-inch full-colour RS485 BMS display
|
| Display | Full Colour LCD | |
|
Interface Comms Cable
|
RS485
|
|
|
​Weight
|
20g
|
|
|
Size
|
​100*70*15mm
|
|
|
Protection Category
|
IP55
|
Not suitable for outdoor use
|
Additional information
| Weight | 1.000000 kg |
|---|---|
| Dimensions | 10 × 10 × 5 cm |