The top mounted interface panel features a press-button State of Charge (SoC) indicator for fast capacity checks, Handy ON/OFF button to isolate when in storage, plus LED indicator for battery status or error identification.
One of the big improvements to this tried and tested product includes the addition of an internal heating film to aid in the charging of the batteries if exposed to sub-zero environments. This innovative feature basically uses a battery charger to engage the heater, which increases the internal temperature of the battery to reach 0 degrees Celcius, to then start charging the battery.
The RV12100CH utilises cutting edge LFP cells encased in a rigid frame, embedded smart BMS and housed in a ruggedised IP20 rated metal case.
*We strongly recommend only using this battery is an indoor or moisture-free environment.
Important Information: PARALLEL CONNECTION CAPABLE
Specifications:
| Voltage (V) | 12.8V |
|---|---|
| Capacity (Ah) | 100Ah |
| Watt Hour (Wh) | 1280Wh |
| Chemistry | LiFePO4 (Lithium Iron Phosphate) |
| Cycle Life | >4000 cycles (80% DoD @ 25°C) |
| Max. continuous discharge current | 100A |
| Max. PEAK discharge current | 200A (10 seconds) |
| Discharge cut-off voltage | 10V |
| Charge Voltage | 14.0V – 14.4V |
| Max. continuous charge current | 100A |
| Operating discharge temperature | -20°C to +50°C |
| Operating charge temperature | -20°C to +50°C (charger engages heater film until battery reaches 0°C and then begins charging) |
| Storage temperature | -20°C to +60°C |
| State of Charge display | Yes |
| Short circuit protection | Yes |
| Ingress Rating | IP20 rating |
| Series connection allowed* | NO |
| Parallel connection allowed* | Up to 8P* (max. continuous discharge current of 0.5C when in parallel) |
| Case structure | Rugged mechanical design |
| Certifications | IEC62619, UN38.3 approved |
| Warranty | 3 years |
 * No Series Connection Allowed.
