Features
4RU size (161mm tall)
Cycle life: >6000 cycles @ 25°C with 95% DoD for daily cyclic applications
Usable capcity of 4.56kWh @ 48 VDC
Working Temperature Range -10°C to 55°C, (Charging 0~55°C: Discharging -10~55°C)
Compact and fashionable 19″ rack design to suit bracket, rack or cabinet installations
Modular design gives the you the power to design systems from 4.8kWh to a commercial sized 1.704MWh
Compatible with many available Hybrid inverters
Backwards Compatible with existing US series products
Pre-charge function to protect ESS from surge currents
Safety Cert. CE, UL1973, UKCA, UN38.3, IEC62619, IEC63056
Communication Protocols: CAN, RS485
15+ Year Design Life
10 year Warranty
*Please note: the UP/US Cable Kit is required for connection to the Inverter/Charger

-Build-in soft-start function able to reduce current strike when inverter need to start from battery
-Dual active protection on BMS level.
-Automatic address setting when connect in multi-group.
-Support wakeup by 5~12V signal from RJ45 port.
-Support upgrade battery module from upper controller via CAN or RS485 communication.
-Enable 95% depth of discharge, available for the inverter which completely follow Pylontech latest protocol to operate.
-The module is non-toxic, non-pollution and environmentally friendly.
-Cathode material is made from LiFePO4 with safety performance and long cycle life.
-Battery management system (BMS)has protection functions including over-discharge, over-charge, over-current and high/low temperature.
-The system can automatically manage charge and discharge state and balance voltage of each cell.
-Flexible configuration, multiple battery modules can be in parallel for expanding capacity and power.
-Adopted self-cooling mode rapidly reduced system entire noise.
-The module has less self-discharge, up to 6 months without charging it on shelf, no memory effect, excellent performance of shallow charge and discharge.

Important Information:

Please check the Pylontech compatibilty guide to see if your inverter uses RS485 or Can Communication protocols.

When using RS485 protocol, This Pylontech Battery can be connected in up to 6 strings of 16 batteries for a total of 96 US5000-B batteries in parallel. No LV Hub is required.

When using Can protocol,This Pylontech Battery can be connected in up to 6 strings of 16 batteries per LV Hub (6×16=96 Batteries per LV Hub), A total of 5 LV Hubs can then be paralleled up for a total of 480 US5000-B batteries in parallel.(96×5=480 Batteries)

No Series connection allowed

External BMS

A LV-HUB communications hub is required when more than 1 string of batteries is paralleled using CAN Communications Protocol.

A single LV-HUB communications hub can manage up to 6 strings of 16 batteries for a total of 96 US5000-B batteries per LV-Hub

A total of five LV Hubs and their associated 96 batteries can then be parralled to a total 480 US5000-B Batteries.

Systems containing between 2 to 5 LV Hubs will require 1 additional LV Hub to act as the Master Hub.

Communications:

RS232
RS485
CAN