Pylontech HV Cable kit. Suits H480XX Batteries and Powercube-X1/H1 Lithium Battery systems - 2.0M
Pylontech HV Cable kit. Suits H480XX Batteries and Powercube-X1/H1 Lithium Battery systems - 2.0M - Image 2

Pylontech HV Cable kit. Suits H480XX Batteries and Powercube-X1/H1 Lithium Battery systems – 2.0M

$99.00
The cable kit comes with:

  • 1 x 2 Metre Orange 20mm copper core cable with Radlok(TM) to ring terminal termination
  • 1 x 2 Metre Black 20mm copper core cable with Radlok(TM) to ring terminal termination
  • 1 x 3 Metre RJ45 communication cable.

Cables have 120A current capacity.

NB. This cable set can be used with the standard UP & US series batteries if paired with Victron Inverters as the comms leads are not used. See Note Below.

*Please Note: to connect to a Victron Energy Inverter Charger via a GX device you require a compatible communicaition cable to enable DVCC (Distributed Voltage Current Control).

VE.Can to Pylontech 1.8M VE.Can to CAN-bus BMS Type B Cable 1.8m
For use with Pylontech: US2000, US3000, UP2500 Modules

VE.Can to CAN-bus BMS Type A Cable 1.8m VE.Can to CAN Bus cable (Type A) 1.8m
For use with Pylontech: US2000C, US3000C, US5000-B & Force L Series Modules

For US & UP Series Modules, use the UP/US Cable Kit

Available on back-order

SKU: 5603
Category:

Description

This HV Cable Kit is suitable for Pylontech High Voltage Modules:

Additional information

Weight 2.000000 kg
Dimensions 20 × 4 × 1 cm
We are committed to protecting your privacy and ensuring your data is handled in compliance with the General Data Protection Regulation (GDPR).
Ok, I agree Privacy Policy