Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron VE.Direct to USB interface
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
SKU 3643 Model # ASS030530010 Barcode # 8719076019589 Brand Victron Energy Shipping Weight 0.0700kg Shipping Width 0.230m Shipping Height 0.015m Shipping Length 0.200m Shipping Cubic 0.006900000m3 
Victron Orion-Tr 12/24-5A (120W) Isolated DC-DC converter
Victron Orion-Tr DC-DC converter 12V to 24V 5A (120W) with Galvanic isolation
Features:
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch.Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.All models are short circuit proof and can be paralleled to increase the output current.
An unlimited number of units can be connected in parallel.IP43 protection
When installed with the screw terminals oriented downwards.Screw terminals
No special tools needed for installation.SKU 3403 Model # ORI122410110 Barcode # 8719076016724 Brand Victron Energy Shipping Weight 0.5800kg Shipping Width 0.140m Shipping Height 0.060m Shipping Length 0.120m Shipping Cubic 0.010080000m3 
Victron Orion-Tr 12/24-10A (240W) Isolated DC-DC converter
Victron Orion-Tr DC-DC converter 12V to 24V 10A (240W) with Galvanic isolation
Features:
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch.Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.All models are short circuit proof and can be paralleled to increase the output current.
An unlimited number of units can be connected in parallel.IP43 protection
When installed with the screw terminals oriented downwards.Screw terminals
No special tools needed for installation.SKU 3404 Model # ORI122424110 Barcode # 8719076035244 Brand Victron Energy Shipping Weight 1.5000kg Shipping Width 0.205m Shipping Height 0.090m Shipping Length 0.130m Shipping Cubic 0.024570000m3 
Victron Orion-Tr 12/24-15A (360W) Isolated DC-DC converter
Victron Orion-Tr DC-DC converter 12V to 24V 15A (360W) with Galvanic isolation
Features:
Remote on/off
The remote on/off eliminates the need for a high current switch in the input wiring. The remote on/off can be operated with a low power switch or by for example the engine run/stop switch.Adjustable output voltage: can also be used as a battery charger
For example to charge a 12 Volt starter or accessory battery in an otherwise 24V system.All models are short circuit proof and can be paralleled to increase the output current.
An unlimited number of units can be connected in parallel.IP43 protection
When installed with the screw terminals oriented downwards.Screw terminals
No special tools needed for installation.Input voltage range 10-17V Under voltage shut down 7V Under voltage restart 7.5V Nominal output voltage 12.2V Output voltage adjust range 20-30V Output voltage tolerance +/- 0.2V Output noise 2mV rms Cont. output current at nominal output voltage and 40°C 15A Maximum output current (10 s) at nominal output voltage minus 20% 25A Short circuit output current 40A Cont. output power at 25°C 430W Cont. output power at 40°C 360W Efficiency 88% Off load current < 100mA Galvanic isolation -20 to +55°C (derate 3% per °C above 40°C) Humidity Max. 95% non-condensing DC connection Screw terminals Maximum cable cross-section 16 mm² (AWG6) Weight 1.8kg Dimensions 130 x 186 x 80 mm (5.1 x 7.3 x 3.2 inch) Standards: Safety
Emission
Immunity
Automotive DirectiveEN 60950
EN 61000-6-3, EN 55014-1
EN 61000-6-2, EN 61000-6-1, EN 55014-2
ECE R10-5SKU 3405 Model # ORI122441110 Barcode # 8719076038832 Brand Victron Energy Shipping Weight 1.9200kg Shipping Width 0.205m Shipping Height 0.090m Shipping Length 0.130m Shipping Cubic 0.024570000m3 
Victron Quattro 12/3000/120-50/50 230V VE.Bus
The Quattro has two AC Inputs & two AC Outputs meaning two independent power sources can be connected, such as a generator or mains power. The Quattro automatically selects the input where voltage is present with the generator input taking priority.
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The automatic and uninterruptible switching will ensure that if the power supply fails, the device will switch over to inverter operation so fast that loads will be unaffected, making this device an ideal choice for emergency power situations and telecommunications applications.
For three-phase operation, three units can be configured, and additionally, potentially unlimited power supply can be achieved with the Multiple System Integration function, which allows for up to 6 Qattros [24/3000/70, for example], to operate in parallel providing 15kW / 18kVA output power and 420 Amps charging capacity.
For split phase operation, two Quattros would be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power.
The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.
Configuring parallel and three-phase systems is made simple with the VEConfigure software tool – the Interface MK3-USB is required.
The basics of using VE Configure
SKU 3211 Model # QUA123020010 Barcode # 8719076024101 Brand Victron Energy Shipping Weight 22.0000kg Shipping Width 0.445m Shipping Height 0.295m Shipping Length 0.330m Shipping Cubic 0.044550000m3 
Victron MultiPlus-II 24/3000/70-32 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off-grid as well as grid-connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.;
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
SKU 3224 Model # PMP242305010 Barcode # 8719076048084 Brand Victron Energy Shipping Weight 21.0000kg Shipping Width 0.580m Shipping Height 0.240m Shipping Length 0.350m Shipping Cubic 0.048720000m3 
Victron MultiPlus-II 48/5000/70-50 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off grid as well as grid connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
Multiplus II Specifications
SKU 3242 Model # PMP482505010 Barcode # 8719076047599 Brand Victron Energy Shipping Weight 31.0000kg Shipping Width 0.655m Shipping Height 0.255m Shipping Length 0.415m Shipping Cubic 0.072072000m3 
Victron Lynx Shunt VE.Can
SKU 3354 Model # LYN040102100 Barcode # 8719076022602 Brand Victron Energy Shipping Weight 1.5940kg Shipping Width 0.300m Shipping Height 0.090m Shipping Length 0.190m Shipping Cubic 0.051300000m3 
Victron BlueSolar MPPT 75/10 Retail
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 75/10 RetailMPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three Step Charging.
With the V.E.Direct Bluetooth Smart dongle, programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
* – To change to settings such as to Lithium Battery the V.E.Direct Bluetooth Smart dongle or VE.Direct to USB interface is required.
MPPT 75/10, 75/15 & MPPT 100/15 Specifications
SKU 3715 Model # SCC010010050R Barcode # 8719076025306 Brand Victron Energy Shipping Weight 0.4700kg Shipping Width 0.210m Shipping Height 0.050m Shipping Length 0.150m Shipping Cubic 0.015750000m3 
Victron SmartSolar MPPT 250/100-MC4 VE.Can
Up to 25 charge controllers can be daisy-chained and connected to a Color Control GX or other GX device. This greatly improves wiring simplicity and cost on large systems. Previously, all units required their own communications cable to be wired to a network of adapters and USB hubs to connect to the GX Device. The VE.DIrect port found on other SmartSolar controllers is retained, ensuring no functionality is lost by selecting the VE.CAN models.
The charge controllers come ready configured for the synchronization mechanism which begins to work as soon as they are connected together with the network cable. ESS (Energy Storage Systems) are supported and controlled by intelligent (CANBUS) batteries but requires a Venus GX (not compatible with the Color Control).
MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron MPPT SmartSolar support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Features:
- With no cooling fan the maximum efficiency exceeds 98% for outstanding conversion efficiency
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
- Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth – Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Extensive electronic protection:
- Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high
- PV short circuit and PV reverse polarity protection
- PV reverse current protection
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
Optional SmartSolar pluggable LCD display
An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
SKU 3759 Model # SCC125110512 Barcode # 8719076055679 Brand Victron Energy Shipping Weight 5.5000kg Shipping Width 0.160m Shipping Height 0.290m Shipping Length 0.330m Shipping Cubic 0.015312000m3 Unit Of Measure ea 
Victron Solar Panel 115W-12V Mono 1015x668x30mm series 4a
This Solar Panel can ONLY be delivered to Business Premises only. Deliveries to residential properties is not available.
Features:
- Low voltage-temperature coefficient enhances high-temperature operation.
- Exceptional low-light performance and high sensitivity to light across the entire solar spectrum.
- 25 Year limited warranty on power output and performance.
- 5 Year Limited warranty on materials and workmanship.
- Sealed, waterproof, multi-functional junction box gives high level of safety.
- High performance bypass diodes minimize the power drop caused by shade.
- Advanced EVA (Ethylene Vinyl Acetate) encapsulation system with triple-layer back sheet meets the most stringent safety requirements for high-voltage operation.
- A sturdy, anodized aluminium frame allows modules to be easily roof-mounted with a variety of standard mounting systems.
- Highest quality, high-transmission tempered glass provides enhanced stiffness and impact resistance.
- Pre wired quick-connect system with MC4 (PV-ST01) connectors.
SKU 3776 Model # SPM041151200 Barcode # 8719076047414 Brand Victron Energy Shipping Weight 9.0000kg Shipping Width 1.025m Shipping Height 0.039m Shipping Length 0.680m Shipping Cubic 0.027183000m3 Unit Of Measure ea