Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron Phoenix Smart IP43 Charger 24/25(1+1) 120-240V
The 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank.
Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Adaptive, intelligent, dynamic charge features
Victron Phoenix Smart IP43 Charger 24/25(3) 120-240V
This adaptive 5-step charger can provide either 30A or 50A of charge to each of three battery banks.
Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Adaptive, intelligent, dynamic charge features – see the datasheet below.
Victron Phoenix Smart IP43 Charger 12/50(1+1) 120-240V
The 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank.
Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Adaptive, intelligent, dynamic charge featuresVictron Phoenix Smart IP43 Charger 24/16(1+1) 120-240V
The 1+1 model provides 3A to the starter-battery, the rest to the ‘house’ bank.
Bluetooth enabled, you can monitor the charger and set alarms straight from your phone.
Adaptive, intelligent, dynamic charge features
Victron Solar Panel 20W-12V Poly 440x350x25mm series 4a
Victron solar panels are made using high quality Polycrystalline & Monocrystalline cells. Victron provide a full range of solar panel modules ranging from 20W – 360W. They are designed for charging deep cycle batteries, for example in vehicles and boats, motor homes, caravans, camping, marine or any other systems with a 12V battery or battery bank.
Solar panels can be utilised to extend battery run time when powering multiple accessories. A number of factors that can influence this include: the time of year, weather conditions, battery capacity and how long you run your appliances. It’s important to over size your solar array (where space allows) so that on a good day your solar panels will be able to fully charge your batteries and keep your loads running whilst free camping.
Victron Ekrano GX
Perfect monitoring & control
Instantly monitor the battery state of charge, power consumption, power harvest from PV, generator, and mains, or check tank levels and temperature measurements. Easily control the shore power input current limit, (auto)start/stop generator(s) or change any setting to optimise the system. Follow up on alerts, perform diagnostic checks and resolve challenges remotely. The Ekrano GX turns any power challenge into an effortless experience.
Expand Your View
The integrated 7 inch touchscreen allows you to have an instant overview of your system and adjust settings in the blink of an eye. Its super slim waterproof design offers a lot of flexibility in designing a crisp and clean dashboard. The touch function can be disabled (or enabled) via a recessed button on the back to prevent unauthorised use.
Simple mounting and configuration
The Ekrano GX is optimised for flush panel or blind hole mounting and has all necessary mounting material supplied. Screw-on terminal blocks keep everything securely in place.
Outsmart any power challenge
The Ekrano GX serves endless purposes, extending perfect control to the most diverse applications. For solutions including generators, such as Marine, or Offgrid & Backup, it will auto-start/stop your generator, or delays ignition until the end of ‘quiet’ periods. For Energy Storage Systems it keeps backup batteries at 100%, kicks-in during power-cuts and diverts excess (solar) power to self consumption, saving you money. For RV and Emergency vehicles it keeps vital systems function flawlessly. But that’s just to name a few…
Optional Accessories:
Similar Other models:
Victron Blue Smart IP65s Charger 12/4(1) 230V AU/NZ Retail
Victron Blue Smart IP65 Battery Charger
The Blue Smart IP65 Charger is a professional battery charger packed with features such as built-in bluetooth to the Victron Connect App (Available on both iOS and Android). The Blue Smart IP65 Battery Chargers are ideal for use on cars, camper vans, caravans, RV’s, tractors, motorcycles and boats and in the garage or on the farm.
Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Potential recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Temperature compensated charging
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Ultra high 95% efficiency “green” battery charger
- Setup and configure, readout of voltage and current by Bluetooth Smart
The battery is charged, smartly and to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Victron Blue Smart Chargers also feature a Storage Mode for less corrosion of the positive plates, typically most chargers only offer up to a float mode, the problem is that the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger during more than 48 hours.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease with Quick Fit connection
The charger comes supplied with both alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected to your battery. Additional Quick Connects and Accessories are also available to purchase separately.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The VictronConnect app allows you to Setup, readout and configure your Blue Smart IP65 Charger via your smartphone (Apple and Android). You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen the readout of voltage and current is default available.
Battery Reconditioning
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with low current up to a higher voltage.
SKU 3261 Model # BPC120433014R Barcode # 8719076044598 Brand Victron Energy Shipping Weight 0.9220kg Shipping Width 0.280m Shipping Height 0.050m Shipping Length 0.180m Shipping Cubic 0.025200000m3 
Victron Smart BatteryProtect 12/24V-65A
The Smart BatteryProtect disconnects the battery from non-essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.
When using Bluetooth to program the Smart BatteryProtect any required engage/disengage levels can be set.
Alternatively, one of nine predefined engage/disengage levels can be set with the programming pin (see manual).If required, Bluetooth can be disabled.
SKU 3473 Model # BPR065022000 Barcode # 8719076041238 Brand Victron Energy Shipping Weight 0.2400kg Shipping Width 0.130m Shipping Height 0.055m Shipping Length 0.060m Shipping Cubic 0.042900000m3
