Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron Lynx Smart BMS 500
The Lynx Smart BMS is a dedicated Battery Management System for Victron Lithium Smart Batteries. This device forms the core of a Victron lithium battery system. The main battery switch can be used as an isolator or failsafe device. All lithium cells are monitored for under or overvoltage conditions. Charge and load sources are controlled so that the cells are maintained in a safe zone. A smart battery monitor is also included. The Lynx Smart BMS is part of the modular Lynx Distribution system.
Lynx Smart BMS Features:
- Built-in 500A contactor, used as a fall-back safety mechanism and also available as a remote controllable main systems switch
- Battery monitor, indicating state of charge percentage and more data.
- Pre-alarm signal: provide a warning before the system shuts down due to -for example- a low cell.
- Bluetooth for use with the Victron GX device, for example the Cerbo GX.
SKU 3355 Model # LYN034160200 Barcode # 8719076047476 Brand Victron Energy Shipping Weight 2.1900kg Shipping Width 0.200m Shipping Height 0.200m Shipping Length 0.300m Shipping Cubic 0.012000000m3 Unit Of Measure ea 
Victron Lynx Distributor
The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system.
The Lynx Distributor has a power LED and four fuse status indication LEDs.
If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can. If the Lynx Distributor is connected to a Lynx Smart BMS it can be monitored and setup with the VictronConnect App.
SKU 3357 Model # LYN060102000 Barcode # 8719076022633 Brand Victron Energy Shipping Weight 2.5260kg Shipping Width 0.410m Shipping Height 0.090m Shipping Length 0.190m Shipping Cubic 0.070110000m3 
Victron BlueSolar MPPT 100/15 Retail
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 100/15 RetailMPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three Step Charging.
With the V.E.Direct Bluetooth Smart dongle, programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 75/10, 75/15 & MPPT 100/15 Specifications
SKU 3717 Model # SCC010015200R Barcode # 8719076025337 Brand Victron Energy Shipping Weight 0.7700kg Shipping Width 0.210m Shipping Height 0.050m Shipping Length 0.150m Shipping Cubic 0.015750000m3 
Victron BlueSolar MPPT 150/60-Tr
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/60-TrMPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Parallel operation is possible
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/45, MPPT 150/60, MPPT 150/70 – with screw- or MC4 PV connection Specifications
SKU 3723 Model # SCC010060200 Barcode # 8719076025474 Brand Victron Energy Shipping Weight 4.0500kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron BlueSolar MPPT 150/60-MC4
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/60-MC4MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Parallel operation is possible
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/45, MPPT 150/60, MPPT 150/70 – with screw- or MC4 PV connection Specifications
SKU 3724 Model # SCC010060300 Barcode # 8719076025481 Brand Victron Energy Shipping Weight 4.0500kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron BlueSolar MPPT 150/70-Tr
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/70-TrMPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Parallel operation is possible
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/45, MPPT 150/60, MPPT 150/70 – with screw- or MC4 PV connection Specifications
SKU 3725 Model # SCC010070200 Barcode # 8719076025511 Brand Victron Energy Shipping Weight 4.0500kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron BlueSolar MPPT 150/70-MC4
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/70-MC4 VE.CanMPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Parallel operation is possible
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/45, MPPT 150/60, MPPT 150/70 – with screw- or MC4 PV connection Specifications
SKU 3726 Model # SCC010070300 Barcode # 8719076025528 Brand Victron Energy Shipping Weight 4.0500kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron BlueSolar MPPT 150/35
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/35MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/35 Specifications
SKU 3720 Model # SCC020035000 Barcode # 8719076025559 Brand Victron Energy Shipping Weight 1.5300kg Shipping Width 0.205m Shipping Height 0.090m Shipping Length 0.130m Shipping Cubic 0.024570000m3 
Victron BlueSolar MPPT 150/45
This Model does NOT have bluetooth capabilities.
For bluetooth features, Victron BlueSolar Controllers require the V.E.Direct Bluetooth Smart dongle.
For in-built Bluetooth please view the SmartSolar range.
The smartsolar version for this model can be viewed here: Victron SmartSolar MPPT 150/45MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The Victron MPPT BlueSolar senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The BlueSolar supports Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximum energy by locking to the optimum MPP. In addition the unit is configured for optimal Three step charging.
With the V.E.Direct Bluetooth Smart dongle , programming, real-time data and history display is available on your smart device.
Inbuilt additional electronic protection provides
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
- Internal temperature sensor compensates absorption and float charge voltage for temperature.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Parallel operation is possible
Three Stage Charging
- Stage One – Bulk or Boost – As much current as possible is delivered in order to rapidly recharge the batteries to about 80%.
- Stage Two – Absorption – When the battery reaches its final charging voltage, known as its absorption voltage the charge allows the current to taper off as the battery nears a full charge.
- Stage Three – Float – At this stage float voltage is applied which is enough to retain a full charge but controlled to prevent overcharging.
MPPT 150/45, MPPT 150/60, MPPT 150/70 – with screw- or MC4 PV connection Specifications
SKU 3722 Model # SCC115045222 Barcode # 8719076053033 Brand Victron Energy Shipping Weight 4.0000kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron SmartSolar MPPT 150/60-MC4
MPPT 150/45 up to 150/100
MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron MPPT SmartSolar support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high.
- PV short circuit and PV reverse polarity protection.
- PV reverse current protection.
Other features:
- With no cooling fan the maximum efficiency exceeds 98%.
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:
- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
- Various Settings
.jpg)
Victron MPPT model names explained
MPPT 150/45, the first number is the maximum PV open circuit voltage. The second number, 45, is the maximum charge current. Use the Victron MPPT Excel sheet or Online MPPT Calculator for PV sizing calculations.
For more information about PWM or MPPT charge controllers, read the Victron whitepaper: which solar charge controller: PWM or MPPT?
MPPT 150/45 up to 150/100 Specifications
SKU 3739 Model # SCC115060311 Barcode # 8719076051398 Brand Victron Energy Shipping Weight 4.0500kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron SmartSolar MPPT 150/70-Tr VE.Can
Up to 25 charge controllers can be daisy-chained and connected to a Color Control GX or other GX device. This greatly improves wiring simplicity and cost on large systems. Previously, all units required their own communications cable to be wired to a network of adapters and USB hubs to connect to the GX Device. The VE.DIrect port found on other SmartSolar controllers is retained, ensuring no functionality is lost by selecting the VE.CAN models.
The charge controllers come ready configured for the synchronization mechanism which begins to work as soon as they are connected together with the network cable. ESS (Energy Storage Systems) are supported and controlled by intelligent (CANBUS) batteries but requires a Venus GX (not compatible with the Color Control).
MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron MPPT SmartSolar support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Features:
- With no cooling fan the maximum efficiency exceeds 98% for outstanding conversion efficiency
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
- Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth – Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Extensive electronic protection:
- Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high
- PV short circuit and PV reverse polarity protection
- PV reverse current protection
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
Optional SmartSolar pluggable LCD display
An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
MPPT 150/70 & MPPT 150/100 with VE.Can interface Specifications
SKU 3741 Model # SCC115070411 Barcode # 8719076050322 Brand Victron Energy Shipping Weight 3.6000kg Shipping Width 0.270m Shipping Height 0.150m Shipping Length 0.250m Shipping Cubic 0.010125000m3 
Victron SmartSolar MPPT 150/70-MC4 VE.Can
Up to 25 charge controllers can be daisy-chained and connected to a Color Control GX or other GX device. This greatly improves wiring simplicity and cost on large systems. Previously, all units required their own communications cable to be wired to a network of adapters and USB hubs to connect to the GX Device. The VE.DIrect port found on other SmartSolar controllers is retained, ensuring no functionality is lost by selecting the VE.CAN models.
The charge controllers come ready configured for the synchronization mechanism which begins to work as soon as they are connected together with the network cable. ESS (Energy Storage Systems) are supported and controlled by intelligent (CANBUS) batteries but requires a Venus GX (not compatible with the Color Control).
MPPT controllers operate solar panels at their Maximum Power Point improving efficiency up to 30% by adjusting input voltage to harvest the maximum power from the solar panels. It then manages this power to supply the varying voltage requirement of the battery plus load.
The MPPT senses when to adjust the output that it is being sent to the battery and will shut down for a few microseconds, calculate and make relevant adjustments. The principle of MPPT is to extract the maximum possible power from a solar panel by setting the most efficient combination of voltage and current – maximum power point.
The Victron MPPT SmartSolar support Advanced Maximum Power Point Detection. Unlike the conventional MPPTs which tend to lock to a local MPP when shady conditions occur, [which may not be the optimum MPP], Advance Maximum Power Point Detection will harvest maximin energy by locking to the optimum MPP.
Features:
- With no cooling fan the maximum efficiency exceeds 98% for outstanding conversion efficiency
- Flexible charge algorithm provides functionality for fully programmable charge algorithm, and eight pre-programmed algorithms, selectable with a rotary switch
- Remote on-off [To connect for example to a BMS]
- Programmable relay to set the device to trip on alarm or other events
- Optional SmartSolar pluggable LCD display
- Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth – Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers.
Extensive electronic protection:
- Internal temperature sensor provides additional electronic protection
- Over-temperature protection and power derating when temperature is high
- PV short circuit and PV reverse polarity protection
- PV reverse current protection
Built-in Bluetooth along with the VictronConnect App provides easy access to the extensive range of functions available on your solar charge controller such as:- Solar Gauge – Realtime power output
- Battery Voltage
- Battery Current
- Battery State
- History Analysis
Optional SmartSolar pluggable LCD display
An optional plug-in LCD display/control provides live-data, set-up and management, straight from the face of the device. Simply remove the rubber seal that protects the plug on the front of the controller, and plug-in the display.
SKU 3742 Model # SCC115070511 Barcode # 8719076051114 Brand Victron Energy Shipping Weight 3.6000kg Unit Of Measure ea