Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron MultiPlus-II 48/3000/35-32 230V GX
Inverter/Charger with GX inside
The MultiPlus-II GX is an Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
A MultiPlus-II with LCD and GX functionality
The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
GX Device Inbuilt
The integrated GX device includes:
- A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery.
- A USB port.
- A Ethernet port.
- A VE.Direct port.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
Applications
The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
Parallel and three phase operation
Only one GX unit is needed in case of Parallel and three phase operation.
The basics of using VE Configure
MultiPlus-II GX 48/3000/35-32
INVERTER/CHARGER
PowerControl & PowerAssist Yes Transfer switch 32A Maximum AC input current 32A Auxiliary output Yes (32A) INVERTER
Input voltage range 38 – 66V Output Output voltage: 230 VAC ± 2%
Frequency: 50 Hz ± 0,1% (1)Cont. output power at 25°C (3) 3000VA / 2400W Cont. output power at 40°C / 65°C 2200W / 1700W Maximum apparent feed-in power 2500VA Peak power 5500W Maximum efficiency 95% Zero load power 11W Zero load power in AES mode 7 W Zero load power in Search mode 2W CHARGER
AC Input Input voltage range: 187-265 VAC
Input frequency: 45 – 65 HzCharge voltage ‘absorption’ 57,6V Charge voltage ‘float’ 55,2V Storage mode 52,8V Maximum battery charge current (4) 35A Battery temperature sensor Yes Programmable relay (5) Yes Protection (2) a – g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration General purpose com. port Yes, 2x GENERAL
Interfaces VE.Can, USB, Ethernet, VE.Direct, Wi-Fi Remote on-off Yes Operating temp. range -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95% ENCLOSURE
Material & Colour Steel, blue RAL 5012 Protection category IP21 Battery-connection M8 bolts 230 V AC-connection Screw terminals 13 mm2 (6 AWG) Weight 26kg Dimensions (hxwxd) 506 x 275 x 147 mm STANDARDS
Safety EN-IEC 60335-1, EN-IEC 60335-2-29
EN-IEC 62109-1, EN-IEC 62109-2Emission / Immunity EN 55014-1, EN 55014-2
EN-IEC 61000-3-2, EN-IEC 61000-3-3
IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3SKU 3240 Barcode # 8719076046448 Brand Victron Energy Shipping Weight 20.7000kg Shipping Width 0.600m Shipping Height 0.250m Shipping Length 0.350m Shipping Cubic 0.052500000m3 Unit Of Measure ea 
Victron EasySolar-II 48/3000/35-32 MPPT 250/70 GX
The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.
The all-in-one Solar Power Solution
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II 48/3000/735-32 inverter/charger
- A SmartSolar 250/70 MPPT -Tr solar charge controller
- A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters. The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be used to set up the system and to change settings.Solar Charge Controller
The DC output of the SmartSolar 250/100 MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.GX Device
The integrated GX device includes:
- A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
- A USB port
- An Ethernet port
- A VE.Direct port
- The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
The basics of using VE Configure
SKU 3258 Model # PMP482307010 Barcode # 8719076045786 Brand Victron Energy Shipping Weight 31.0000kg Shipping Width 0.910m Shipping Height 0.325m Shipping Length 0.350m Shipping Cubic 0.105105000m3 
Victron MultiPlus-II 48/8000/110-100/100 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off grid as well as grid connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
Multiplus II Specifications
SKU 3248 Model # PMP482805000 Barcode # 8719076050568 Brand Victron Energy Shipping Weight 44.0000kg Shipping Width 0.300m Shipping Height 0.450m Shipping Length 0.740m Shipping Cubic 0.099900000m3 Unit Of Measure ea 
Victron MultiPlus 48/3000/35-16 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate for supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
Multiplus 2000VA and 3000VA Specifications
SKU 3237 Model # PMP483020001 Barcode # 8719076024040 Brand Victron Energy Shipping Weight 20.0000kg Shipping Width 0.450m Shipping Height 0.290m Shipping Length 0.335m Shipping Cubic 0.044370000m3 
Victron MultiPlus 48/3000/35-50 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate for supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
Multiplus 2000VA and 3000VA Specifications
SKU 3238 Model # PMP483021010 Barcode # 8719076024057 Brand Victron Energy Shipping Weight 20.0000kg Shipping Width 0.445m Shipping Height 0.295m Shipping Length 0.330m Shipping Cubic 0.044550000m3 
Victron MultiPlus-II 48/10000/140-100/100 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off-grid as well as grid-connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
Multiplus II Specifications
SKU 3249 Model # PMP483105000 Barcode # 8719076044956 Brand Victron Energy Shipping Weight 51.8000kg Shipping Width 0.300m Shipping Height 0.450m Shipping Length 0.750m Shipping Cubic 0.101250000m3 Unit Of Measure ea 
Victron MultiPlus 48/5000/70-100 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate for supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
MultiPlus 48 Volt 48/5000/70 PowerControl Yes PowerAssist Yes Transfer switch (A) 100 INVERTER Input voltage range (V DC) 9,5 – 17 V 19 – 33 V 38 – 66 V Output Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1) Cont. output power at 25°C (VA) (3) 5000 Cont. output power at 25°C (W) 4000 Cont. output power at 40°C (W) 3700 Cont. output power at 65°C (W) 3000 Peak power (W) 10.000 Maximum efficiency (%) 94 / 95 Zero load power (W) 30 / 35 Zero load power in AES mode (W) 25 / 30 Zero load power in Search mode (W) 10 / 15 CHARGER AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz Power factor: 1 Charge voltage ‘absorption’ (V DC) 14,4 / 28,8 / 57,6 Charge voltage ‘float’ (V DC) 13,8 / 27,6 / 55,2 Storage mode (V DC) 13,2 / 26,4 / 52,8 Charge current house battery (A) (4) 120 / 70 Battery temperature sensor yes GENERAL Auxiliary output (5) Yes (50A) Programmable relay (6) Yes Protection (2) a – g VE.Bus communication port For parallel and three phase operation, remote monitoring and system integration General purpose com. port Yes Remote on-off Yes Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling) Humidity (non-condensing): max 95% ENCLOSURE Common Characteristics Material & Colour: aluminium (blue RAL 5012) Protection category: IP 21 230 V AC-connection M6 bolts Weight (kg) 30 Dimensions (hxwxd in mm) 444 x 328 x 240 STANDARDS Safety EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 Emission, Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Road vehicles 12V and 24V models: ECE R10-4 Anti-islanding See Victrons website 1) N/A for AU
2) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) 230 VAC on inverter output
g) input voltage ripple too highSKU 3241 Model # PMP485021010 Barcode # 8719076024088 Brand Victron Energy Shipping Weight 35.0000kg Shipping Width 0.530m Shipping Height 0.340m Shipping Length 0.440m Shipping Cubic 0.079288000m3 
Victron Phoenix Inverter 48/1600 230V Smart
The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.
Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.
Other features available via Bluetooth and the VictronConnect app include;
- Switch the device on (normal or ECO) and off via Bluetooth.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
- Full monitoring system (Note that alarms and errors are only shown when the app is active).
- Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
- Share settings – share the current product settings with other products, using your device.
- Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
- Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.
Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.
Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.
Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Available models include 1600VA and 2000VA for 1
Phoenix 1600VA – 3000VA specifications
SKU 3193 Model # PIN482160000 Barcode # 8719076042716 Brand Victron Energy Shipping Weight 13.7900kg Shipping Width 0.240m Shipping Height 0.300m Shipping Length 0.560m Shipping Cubic 0.040320000m3 
Victron Phoenix Inverter 48/2000 230V Smart
The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.
Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.
Other features available via Bluetooth and the VictronConnect app include;
- Switch the device on (normal or ECO) and off via Bluetooth.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
- Full monitoring system (Note that alarms and errors are only shown when the app is active).
- Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
- Share settings – share the current product settings with other products, using your device.
- Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
- Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.
Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.
Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.
Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Available models include 1600VA and 2000VA for 12, 24
Phoenix 1600VA – 3000VA specifications
SKU 3194 Model # PIN482200000 Barcode # 8719076042723 Brand Victron Energy Shipping Weight 14.6000kg Shipping Width 0.240m Shipping Height 0.300m Shipping Length 0.560m Shipping Cubic 0.040320000m3 
Victron Phoenix Inverter 48/5000 230V Smart
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on Victrons’ proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan, RV or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.Phoenix Inverters Smart 5000VA Features:
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
- Monitoring: In and output voltage, load and alarms
VE.Direct communication port – The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability – The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power – Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools
Remote on/off – A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example)
SKU 3196 Model # PIN482500000 Barcode # 8719076047940 Brand Victron Energy Shipping Weight 31.0000kg Shipping Width 0.250m Shipping Height 0.380m Shipping Length 0.650m Shipping Cubic 0.061750000m3 Unit Of Measure ea 
Victron Phoenix Inverter 48/250 230V VE.Direct AU/NZ
SKU 3188 Model # PIN482510300 Barcode # 8719076034117 Brand Victron Energy Shipping Weight 3.1000kg Shipping Width 0.300m Shipping Height 0.150m Shipping Length 0.210m Shipping Cubic 0.009450000m3
