Shipping class: Free Shipping

The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.

Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.

Other features available via Bluetooth and the VictronConnect app include;

• Switch the device on (normal or ECO) and off via Bluetooth.
• Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
• Full monitoring system (Note that alarms and errors are only shown when the app is active).
• Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
• Share settings – share the current product settings with other products, using your device.
• Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
• Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.

Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.

Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.

Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.

Available models include 1600VA and 2000VA for 12, 24 or 48V systems and there are several optional connections available such as Remote on/off switch and Remote Control Panel.

Phoenix 1600VA – 3000VA specifications

SKU	3182
Model #	PIN242200000
Barcode #	8719076042709
Brand	Victron Energy
Shipping Weight	14.6000kg
Shipping Width	0.240m
Shipping Height	0.300m
Shipping Length	0.560m
Shipping Cubic	0.040320000m3

A Quattro, plus ESS (Energy Storage System) functionality

The Quattro-II can be connected to two independent AC sources, for example, the public grid and a generator, or two generators. The Quattro-II will automatically connect to the active source. Similar to the Victron Energy MultiPlus-II, the Quattro-II is also a combined inverter and charger. Additionally, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, hybrid PowerAssist technology plus multiple system integration features such as three or split phase operation and parallel operation.

Two AC Inputs & two AC Outputs

The Quattro-II can be connected to two independent AC sources, for example, shore-side power and a generator, or two generators. The Quattro-II will automatically connect to the active source. The main output has no-break functionality. In the event of a grid failure, or shore or generator power being disconnected, the Quattro-II takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on one of the inputs of the Quattro-II. Loads that should not discharge the battery, such as air-conditioning or a water heater can be connected to this output.

Unique PowerAssist and PowerControl feature

The Quattro-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shoreside supply with power taken from the battery. To implement PowerControl and
PowerAssist and to optimise self-consumption with external current sensing, a Current Transformer Sensor 100A:50mA is required.

A maximum grid or generator current can be set. The Quattro-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the Quattro-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.

Virtually unlimited power thanks to parallel operation

Up to 6 Quattros-II can operate in parallel to achieve higher power output. Three phases or split phase operation is also possible.

Parallel and 3 Phase operation

Up to 6 Quatros can operate in parallel to achieve higher power output. Six 24/5000/120 units, for example, will provide 25 kW / 30 kVA output power with 720 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three-phase output, and up to 6 sets of three units can be parallel connected per phase for a 75 kW / 90 kVA inverter and more than 2100 Amps charging capacity.

Solar energy: AC power available even during a grid failure

The Quattro-II can be used in off-grid as well as grid-connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.

On-site system configuring, monitoring and control

Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available such as Victron Energys’ Cerbo GX, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.

Remote configuring and monitoring

Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on Victron’s VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.

Standard Marine, Mobile or Off-grid application Loads that should shut down when AC input power is not available can be connected to a second output. These loads will be taken into account by the PowerControl and  PowerAssist function in order to limit AC input current to a safe value when AC power is available.

 

Application with MPPT Solar Charge Controller

 

Quattro-II			24/5000/120-50
PowerControl & PowerAssist			Yes
Transfer switch			50 A
Maximum AC input current			50 A
INVERTER
DC Input voltage range			19–33 V
Output			Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)
Cont. output power at 25°C (3)			5000 VA
Cont. output power at 25°C			4000 W
Cont. output power at 40°C			3700 W
Cont. output power at 65°C			3000 W
Maximum apparent feed-in power			5000 VA
Peak power			9000 W
Maximum efficiency			96%
Zero load power			18 W
Zero load power in AES mode			12 W
Zero load power in Search mode			2 W
CHARGER
AC Input			Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz power factor: 1
Charge voltage ‘absorption’			28.8 V
Charge voltage ‘float’			27.6 V
Storage mode			26.4 V
Max. battery charge current (4)			120 A
Battery temperature sensor			Yes
GENERAL
Auxiliary output			Yes (32A) Default setting: switches off when in inverter mode
External AC current sensor (optional)			100A
Programmable relay (5)			Yes
Protection (2)			a – g
VE.Bus communication port			For parallel and three phase operation, remote monitoring and system integration
General purpose com. port			Yes, 2x
Remote on-off			Yes
Operating temperature range			-40 to +65°C (fan assisted cooling)
Humidity (non-condensing)			max 95%
ENCLOSURE
Material & Colour			Steel, blue RAL 5012
Protection category			IP22
Battery-connection			M8 bolts
230 V AC-connection			Screw terminals 13 mm² (6 AWG)
Weight			30 kg
Dimensions (hxwxd)			560 x 328 x 148 mm
STANDARDS
Safety			EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1, EN-IEC 62109-2
Emission, Immunity			EN 55014-1, EN 55014-2 EN-IEC 61000-3-2, EN-IEC 61000-3-3 IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Uninterruptible power supply			Please consult the certificates on Victrons website.
Anti-islanding			Please consult the certificates on Victrons website.
1) Can be adjusted to 60 Hz 3) Non-linear load, crest factor 3:1 2) Protection key: 4) At 25°C ambient a) output short circuit 5) Programmable relay which can be set for general alarm, DC under voltage or b) overload genset start/stop function. AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A c) battery voltage too high up to 60VDC d) battery voltage too low e) temperature too high f) 230 VAC on inverter output g) input voltage ripple too high

SKU	3230
Model #	QUA242505010
Barcode #	8719076052920
Brand	Victron Energy
Shipping Weight	33.0000kg
Shipping Width	0.340m
Shipping Height	0.440m
Shipping Length	0.530m
Shipping Cubic	0.079288000m3

The Quattro has two AC Inputs & two AC Outputs meaning two independent power sources can be connected, such as a generator or mains power. The Quattro automatically selects the input where voltage is present with the generator input taking priority.

PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.

The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.

The automatic and uninterruptible switching will ensure that if the power supply fails, the device will switch over to inverter operation so fast that loads will be unaffected, making this device an ideal choice for emergency power situations and telecommunications applications.

For three-phase operation, three units can be configured, and additionally, potentially unlimited power supply can be achieved with the Multiple System Integration function, which allows for up to 6 Qattros [24/3000/70, for example], to operate in parallel providing 15kW / 18kVA output power and 420 Amps charging capacity.

For split phase operation, two Quattros would be stacked to provide 120-0-120V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30kW / 36kVA of split phase power.

The Quattro can be used in off grid as well as grid connected PV and other alternative energy systems. Loss of mains detection software is available.

Configuring parallel and three-phase systems is made simple with the VEConfigure software tool – the Interface MK3-USB is required.

 

 

 

The basics of using VE Configure

 

 

SKU	3231
Model #	QUA248020010
Barcode #	8719076024194
Brand	Victron Energy
Shipping Weight	44.0000kg
Shipping Width	0.540m
Shipping Height	0.380m
Shipping Length	0.470m
Shipping Cubic	0.096444000m3