Shipping class: Free Shipping

The MultiPlus is an Inverter and Charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features: 

• True sine wave inverter
• Adaptive charging
• Hybrid PowerAssist
• PowerControl
• Multiple system integration

Multifunctional, with intelligent power management

The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below.

Parallel operation and three phase capability

Up to six Multis can operate in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output.

PowerControl – Dealing with limited generator, shore side or grid power

With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.

PowerAssist – Boosting the capacity of shore or generator power

This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.

Four stage adaptive charger and dual bank battery charging

The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three-stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery.

High start-up power

Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.

Search Mode

When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.

Programmable relay

By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).

Remote on / off / charger on

Three pole connector to mount an external remote if required.

Remote configuring and monitoring

Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on Victrons Free VRM (Victron Remote Management) website, free of charge.When connected to the internet, systems can be accessed remotely, and settings can be changed.

 

 

 

The basics of using VE Configure

 

MultiPlus 24/2000/50
PowerControl / PowerAssist	YES
Three Phase and parallel operation	YES
Transfer switch	35A
INVERTER
Input voltage range	19 – 33V
Output	Output voltage: 230VAC ± 2%        Frequency: 50Hz ± 0,1%   (1)
Cont. output power at 25°C     (3)	2000VA
Cont. output power at 25°C	1600W
Cont. output power at 40°C	1400W
Cont. output power at 65°C	1000W
Peak power	3500 W
Maximum efficiency	94%
Zero-load power	9W
Zero-load power in search mode	3W
CHARGER
AC Input	Input voltage range: 187-265 VAC                Input frequency: 45 –65 Hz
Charge voltage ‘absorption’	28.8V
Charge voltage ‘float’	27.6V
Storage mode	26.4V
Charge current house battery    (4)	50A
Charge current starter battery	1A
Battery temperature sensor	YES
GENERAL
Programmable relay   (5)	YES
Protection	Output short circuit Overload Battery voltage too high Battery voltage too low Temperature too high 230VAC on inverter output Input voltage ripple too high
VE.Bus communication port	For parallel and three phase operation, remote monitoring and system integration
Remote on-off	On/Off
DIP switches	Battery charge voltage / search mode
Internal DC fuse	NO
Common Characteristics	Operating temp. range: -40 to +65°C (fan assisted cooling)Humidity (non-condensing): max 95%
ENCLOSURE
Common Characteristics	Material & Colour: Steel(RAL 5012)  /  Protection Level: IP22
Battery-connection	M8 Bolts
230V AC-connection	Screw
Weight	13.5KG
Dimensions (h x w x d)	500 x 225 x 135 mm
STANDARDS
Safety	EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1
Emission Immunity	EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3
Automotive Directive	ECE R10-5
NOTES
	1) Can be adjusted to 60Hz and to 240V 3) Non-linear load, crest factor 3:1 4) At 25°C ambient 5) Programmable relay which can be set for:    general alarm, DC under voltage or generator start/stop signal function AC rating: 230V/4A DC rating: 4A up to 35VDC, 1A up to 60VDC

 

SKU	3217
Model #	PMP242200000
Barcode #	8719076052173
Brand	Victron Energy
Shipping Weight	17.5000kg
Shipping Width	0.240m
Shipping Height	0.330m
Shipping Length	0.590m
Shipping Cubic	0.046728000m3
Unit Of Measure	ea

Inverter/Charger with GX inside

The MultiPlus-II GX is an Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
 

A MultiPlus-II with LCD and GX functionality

The MultiPlus-II GX integrates a MultiPlus-II inverter/charger and a GX device with a 2 x 16 character display.
 

GX Device Inbuilt

The integrated GX device includes:

• A VE.Can interface. This can be used to connect to Victron VE.Can devices (eg VE.Can MPPTs), or the port can be reconfigured via the Remote Console for use with a compatible CAN-bus Li-ion Battery.
• A USB port.
• A Ethernet port.
• A VE.Direct port.
   

Display and Wi-Fi

The display reads battery, inverter and solar charge controller parameters.
The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
 

Applications

The MultiPlus-II GX is intended for applications where additional interfacing with other products and/or remote monitoring is required, such as on-grid or off-grid energy storage systems and certain mobile applications.
 

Parallel and three phase operation

Only one GX unit is needed in case of Parallel and three phase operation.

 

 

The basics of using VE Configure

 

SKU	3225
Model #	PMP242306000
Barcode #	8719076051695
Brand	Victron Energy
Shipping Weight	21.0000kg
Shipping Width	0.580m
Shipping Height	0.240m
Shipping Length	0.350m
Shipping Cubic	0.048720000m3

Technical details

• Input voltage range 19 – 33VDC
• Output 230VAC +/- 2% 50Hz +/- 0.1% (adjustable to 240V 60Hz)
• Continuous output power @ 25degC 1600VA 1300W
• Peak power 3000W
• Efficiency 94%
• Zero-load power 10W, in search mode 3W
• Programmable relay which can be set for general alarm, DC undervoltage or genset start signal function
• Enclosure made from aluminium, blue RAL5012, IP21 rating
• Dimensions 375 x 214 x 110 (HxWxD) in mm
• Weight 10kg

Quick Install Guide

Manual

SKU	3172
Model #	CIN241620000
Barcode #	8719076021667
Brand	Victron Energy
Shipping Weight	11.0000kg
Shipping Width	0.300m
Shipping Height	0.520m
Shipping Length	0.200m
Shipping Cubic	0.031200000m3

The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range. 

Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.

Other features available via Bluetooth and the VictronConnect app include;

• Switch the device on (normal or ECO) and off via Bluetooth.
• Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
• Full monitoring system (Note that alarms and errors are only shown when the app is active).
• Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
• Share settings – share the current product settings with other products, using your device.
• Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
• Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.

Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.

Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.

Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.

Available models include 1600VA and 2000VA for 12, 24 or 48V systems and there are several optional connections available such as Remote on/off switch and Remote Control Panel.

Phoenix 1600VA – 3000VA specifications

SKU	3181
Model #	PIN242160000
Barcode #	8719076042693
Brand	Victron Energy
Shipping Weight	13.7900kg
Shipping Width	0.240m
Shipping Height	0.300m
Shipping Length	0.560m
Shipping Cubic	0.040320000m3