Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron Adapter Cord 32A/3 to single ph.-CEE Plug 5P/CEE Coupling 3P
Victron Adapter Cord 32A/3 to single ph.-CEE Plug 5P/CEE Coupling 3P
Victron Power Inlet stainless steel with cover 32A/250Vac (2p/3w)
Victron Power Inlet stainless steel with cover 32A/250Vac (2p/3w)
Victron EasyPlus Compact 12/1600/70-16 230V VE.Bus
The EasyPlus is a multifunctional energy system consisting of a powerful sine wave inverter, a sophisticated battery charger, a high-speed AC transfer switch and AC distribution in a single lightweight and compact enclosure. The system has been designed for those who want to enjoy the comfort and freedom of a complete energy system without spending time on the installation of separate components and difficult technical procedures.
The EasyPlus is connected to the batteries and to the shore power or generator. The maximum available generator or shore current is set using the dial on the control panel.
The power consumers are divided into two groups. The first group consists of the ‘regular’, low or short-term power users such as sockets or kitchen equipment. This group can be fed from both shore/generator and battery power via the inverter.
The second group is the ‘heavy user’ circuit. This can be a water heater or the air-conditioning. In order to protect the batteries from excessive discharge, this group is shore/generator-only and cannot be supplied when the inverter is functioning. Unique PowerAssist® technology protects the shore or generator from being overloaded by adding extra inverter power when needed.
Just add solar panels and a suitable BlueSolar/SmartSolar MPPT controller for a complete grid-independent power system.
- 12 Volt 1600 VA sine wave inverter (3000 Watt peak power).
- 70 A charger incl. 4 A trickle charge for start battery.
- Unique PowerAssist® technology protects the shore or generator from being overloaded by adding extra inverter power when needed.
- 4 Stage adaptive charge technology for quick and accurate battery charging.
- The AC distribution consists of an RCD (30mA/16A) and four AC outputs protected by two 10 A and two 16 A circuit breakers.
- One 16 A output is controlled by the AC input: it will switch on only when AC is available.
- RCD (30 mA/16 A) on AC output.
- No-break system: uninterrupted switching between shore/generator and inverter.
- Battery cables included.
The basics of using VE Configure
SKU 3206 Model # CEP121620000 Barcode # 8719076021582 Brand Victron Energy Shipping Weight 14.3000kg Shipping Width 0.300m Shipping Height 0.620m Shipping Length 0.200m Shipping Cubic 0.037200000m3 
Victron EasySolar 12/1600/70-16 230V MPPT 100/50
The EasySolar is an all-in-one solar power solution. It incorporates the following hardware in a compact vertical cabinet:
- Multiplus Compact 12/1600/70 inverter charger
- Bluesolar MPPT 100/50 solar controller
- AC Circuit Breakers and RCD
- PV Array Combiner (Three sets of MC4 PV connectors)
With a minimum of wiring the device is easy to install and combines all the features of the Multiplus, Bluesolar MPPT and is completed with the AC distribution functionality, which consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available.
Up to three strings of PV panels can be connected with three sets of MC4 (PV-ST01) PV connectors.
Included features include:
Mulitplus
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
MPPT
- Advanced Maximum Power Point Detection
- Three Step Charging
- Inbuilt additional electronic protection provides
- PV short circuit and PV reverse polarity protection
- PV reverse current protection.
Unique solar application software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. Please see Victron Downloads
The basics of using VE Configure
SKU 3255 Model # CEP121621000 Barcode # 8719076021599 Brand Victron Energy Shipping Weight 17.0500kg Shipping Width 0.300m Shipping Height 0.950m Shipping Length 0.200m Shipping Cubic 0.057000000m3 
Victron MultiPlus Compact 12/1600/70-16 230V VE.Bus
A powerful true sine wave Inverter combined with a sophisticated battery charger featuring adaptive charge technology and a high-speed AC transfer switch, the MultiPlus Compact delivers advanced features which provide a range of new applications.
- Uninterrupted AC power
- PowerControl – Dealing with limited generator or shore side power
- PowerAssist – Boosting the capacity of shore or generator power
- Programmable relay
The basics of using VE Configure
SKU 3205 Model # CMP121620000 Barcode # 8719076021964 Brand Victron Energy Shipping Weight 12.0000kg Shipping Width 0.300m Shipping Height 0.520m Shipping Length 0.200m Shipping Cubic 0.031200000m3 
Victron MultiPlus 12/500/20-16 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable. Some of the features included:
- True sine wave inverter
- Adaptive charging
- High start-up power
- Search Mode
- Programmable Relay
The High-startup power function on the MulitPlus 500VA – 1600VA series is a feature that allows the user to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Supporting virtually uninterrupted power supply, the UPS capability of the inverter is automatically activated and takes over if there is a loss of grid supply. [less than 20 milliseconds]
For higher power applications you may consider the larger MultiPlus or the Quattro range both of which bring the possibility of unlimited power with the Multiple system integration functionality.
For detailed information on this product, click on the links to the right.
View additional information on system designs and upgrades.
Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
MulitPlus 500VA – 1600VA specifications
SKU 3198 Model # PMP121500000 Barcode # 8719076046363 Brand Victron Energy Shipping Weight 6.0000kg Shipping Width 0.385m Shipping Height 0.165m Shipping Length 0.255m Shipping Cubic 0.017238000m3 
Victron MultiPlus 12/2000/80-32 230V VE.Bus
The MultiPlus is an Inverter and Charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
Multifunctional, with intelligent power management
The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below.
Parallel operation and three phase capability
Up to six Multis can operate in parallel to achieve higher power output. In addition to parallel connection, three units can be configured for three-phase output.
PowerControl – Dealing with limited generator, shore side or grid power
With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery.
Four stage adaptive charger and dual bank battery charging
The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three-stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery.
High start-up power
Needed to start high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Search Mode
When Search Mode is ‘on’, the power consumption of the inverter in no-load operation is decreased by approx. 70%. In this mode the Multi, when operating in inverter mode, is switched off in case of no load or very low load, and switches on every two seconds for a short period. If the output current exceeds a set level, the inverter will continue to operate. If not, the inverter will shut down again.
Programmable relay
By default, the programmable relay is set as an alarm relay, i.e. the relay will de-energise in the event of an alarm or a pre-alarm (inverter almost too hot, ripple on the input almost too high, battery voltage almost too low).
Remote on / off / charger on
Three pole connector to mount an external remote if required.
Remote configuring and monitoring
Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on Victrons Free VRM (Victron Remote Management) website, free of charge.When connected to the internet, systems can be accessed remotely, and settings can be changed.
The basics of using VE Configure
MultiPlus 12/2000/80 PowerControl / PowerAssist YES Three Phase and parallel operation YES Transfer switch 35A INVERTER Input voltage range 9.5 – 17V Output Output voltage: 230VAC ± 2% Frequency: 50Hz ± 0,1% (1) Cont. output power at 25°C (3) 2000VA Cont. output power at 25°C 1600W Cont. output power at 40°C 1400W Cont. output power at 65°C 1000W Peak power 3500 W Maximum efficiency 93% Zero-load power 10W Zero-load power in search mode 3W CHARGER AC Input Input voltage range: 187-265 VAC Input frequency: 45 –65 Hz Charge voltage ‘absorption’ 14.4V Charge voltage ‘float’ 13.8V Storage mode 13.2V Charge current house battery (4) 80A Charge current starter battery 1A Battery temperature sensor YES GENERAL Programmable relay (5) YES Protection Output short circuit
Overload
Battery voltage too high
Battery voltage too low
Temperature too high
230VAC on inverter output
Input voltage ripple too highVE.Bus communication port For parallel and three phase operation, remote monitoring and system integration Remote on-off On/Off DIP switches Battery charge voltage / search mode Internal DC fuse NO Common Characteristics Operating temp. range: -40 to +65°C (fan assisted cooling)Humidity (non-condensing): max 95% ENCLOSURE Common Characteristics Material & Colour: Steel(RAL 5012) / Protection Level: IP22 Battery-connection M8 Bolts 230V AC-connection Screw Weight 13.5KG Dimensions (h x w x d) 500 x 225 x 135 mm STANDARDS Safety EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 Emission Immunity EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 Automotive Directive ECE R10-5 NOTES 1) Can be adjusted to 60Hz and to 240V
3) Non-linear load, crest factor 3:1
4) At 25°C ambient
5) Programmable relay which can be set for:
general alarm, DC under voltage or generator start/stop signal function
AC rating: 230V/4A
DC rating: 4A up to 35VDC, 1A up to 60VDCSKU 3202 Model # PMP122200000 Barcode # 8719076052135 Brand Victron Energy Shipping Weight 17.5000kg Shipping Width 0.240m Shipping Height 0.330m Shipping Length 0.590m Shipping Cubic 0.046728000m3 Unit Of Measure ea 
Victron MultiPlus 12/3000/120-16 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
Multiplus 2000VA and 3000VA Specifications
SKU 3208 Model # PMP122300001 Barcode # 8719076045151 Brand Victron Energy Shipping Weight 20.9000kg Shipping Width 0.450m Shipping Height 0.290m Shipping Length 0.330m Shipping Cubic 0.043065000m3 
Victron MultiPlus 12/3000/120-50 230V VE.Bus
The MultiPlus is an inverter and charger combination supporting easy installation by way of the Victron MK3-USB interface cable, including the following features:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
The PowerAssist feature will enable the unit to supplement the alternative source. The unit will compensate for supply from the battery at times of insufficient power and when no longer required, the excess power will be used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
The basics of using VE Configure
Multiplus 2000VA and 3000VA Specifications
SKU 3209 Model # PMP123021010 Barcode # 8719076023951 Brand Victron Energy Shipping Weight 21.7000kg Shipping Width 0.445m Shipping Height 0.295m Shipping Length 0.330m Shipping Cubic 0.044550000m3 
Victron Phoenix Inverter Compact 12/1600 230V VE.Bus
Technical details
- Input voltage range 9.5 – 17VDC
- Output 230VAC +/- 2% 50Hz +/- 0.1% (adjustable to 240V 60Hz)
- Continuous output power @ 25degC 1600VA 1300W
- Peak power 3000W
- Efficiency 92%
- Zero-load power 8W, in search mode 2W
- Programmable relay which can be set for general alarm, DC undervoltage or genset start signal function
- Enclosure made from aluminium, blue RAL5012, IP21 rating
- Dimensions 375 x 214 x 110 (HxWxD) in mm
- Weight 10kg
SKU 3157 Model # CIN121620000 Barcode # 8719076021636 Brand Victron Energy Shipping Weight 11.0000kg Shipping Width 0.300m Shipping Height 0.520m Shipping Length 0.200m Shipping Cubic 0.031200000m3 
Victron Phoenix Inverter Compact 12/2000 230V VE.Bus
SKU 3158 Model # CIN122200000 Barcode # 8719076037514 Brand Victron Energy Shipping Weight 14.0000kg Shipping Width 0.330m Shipping Height 0.620m Shipping Length 0.220m Shipping Cubic 0.045012000m3 
Victron Phoenix Inverter 12/2000 230V Smart
The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.
Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.
Other features available via Bluetooth and the VictronConnect app include;
- Switch the device on (normal or ECO) and off via Bluetooth.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
- Full monitoring system (Note that alarms and errors are only shown when the app is active).
- Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
- Share settings – share the current product settings with other products, using your device.
- Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
- Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.
Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.
Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.
Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Available models include 1600VA and 2000VA for 12, 24 or 48V systems and there are several optional connections available such as Remote on/off switch and Remote Control Panel.
SKU 3169 Model # PIN122201000 Barcode # 8719076057512 Brand Victron Energy Shipping Weight 14.6000kg Shipping Width 0.240m Shipping Height 0.300m Shipping Length 0.560m Shipping Cubic 0.040320000m3