Shipping class: Free Shipping

The Victron SmartShunt is a powerful battery monitor with Bluetooth on board. It can be installed out of sight, behind the scenes – whilst live data from the device is relayed to your mobile phone or tablet via the VictronConnect App for Android or iOS or on your Mac and PC. The SmartShunt is a great alternative for a BMV battery monitor where a separate display isn’t required.

Available in the below models:
IP21 rated: 300A, 500A, 1000A, 2000A
IP65 rated: 300A (Coming soon), 500A, 1000A, 2000A

Monitored Battery Parameters include:

• Battery State-of-Charge (SoC)
• Voltage of up to 2 batteries
• Current Load
• Time to go
• Extensive historical information
• … and much more

Auxilary Input Options:

The SmartShunt can do more than comprehensively monitor your main battery bank – additionally you can choose to either:

• Monitor the voltage of a second battery, for exmaple the starter battery or;
• Connect a temperature sensor (optional accessory) for temperature compensated charging or;
• Monitor the midpoint voltage of your battery bank (cable included) to keep an eye on battery health.

Connection to any Victron GX Device

The SmartShunt also features a VE.Direct port so can also be connected to any device in the GX range including the Colour Controller and Cerbo GX via a VE.Direct cable.

Differences compared to BMV-712 Battery Monitor

• No programmable visual and audible alarm
• No programmable relay.

Smartshunt Video Overview

How to set up a Victron BMV/SmartShunt Battery Monitor for lead and lithium batteries

SmartShunt	300 A / 500 A / 1000 A / 2000 A
Supply voltage range	6,5 – 70 VDC
Current draw	< 1mA
Input voltage range, auxiliary battery	6,5 – 70 VDC
Battery capacity (Ah)	1 – 9999 Ah
Operating temperature range	-40 +50°C (-40 – 120°F)
Measures voltage of second battery, or temperature, or midpoint	Yes
Temperature measurement range	-20 +50°C
VE.Direct communication port	Yes
RESOLUTION & ACCURACY
Current	± 0,1A
Voltage	± 0,01V
Amp hours	± 0,1 Ah
State of charge (0 – 100%)	± 0,1%
Time to go	± 1 min
Temperature (0 – 50°C or 30 – 120°F)	± 1°C/°F
Accuracy of current measurement	± 0,4%
Offset	Less than 10 / 10 / 20 / 40 mA
Accuracy of voltage measurement	± 0,3%
INSTALLATION & DIMENSIONS
Dimensions (h x w x d)	300 A: 44 x 120 x 44 mm 500 A: 46 x 120 x 54 mm 1000 A: 68 x 168 x 75 mm 2000 A: 68 x 168 x 100 mm
Shunt connection bolts	300 A: M8 500 A, 1000 A, 2000 A: M10 (0.3937 inch)
Protection category	IP21
STANDARDS
Safety	EN 60335-1
Emission / Immunity	EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3
Automotive	EN 50498
Cables (attached)	Two 1.5 m cables with 1 A fuse, for ‘+’ connection and starter battery or midpoint connectionAnd a 1.5 m cable with a VE.Direct socket. Note that a (not included) VE.Direct cable is needed to connect a GX device.
Temperature sensor	Optional (ASS000100000)
A note regarding the range of the Bluetooth signal	The shunt and the electric cables do negatively influence the range of the Bluetooth signal. The resulting range of 10-15 meter is however satisfactory in most cases. The proximity of other electrically conducting elements, such as the metal chassis of a vehicle or seawater around the hull if a boat, may reduce the range of the Bluetooth signal to an unacceptable level. The solution in such a case is to add a VE.Direct Bluetooth Dongle (ASS030536011) to the system, and to switch off Bluetooth in the SmartShunt.
STORED TRENDS
Data stored	Battery voltage, Current, State of Charge % as well as the Aux input (Battery temperature, or midpoint deviation, or starter battery voltage).
Number of days trends data is stored	46