Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron Phoenix Inverter 12/375 230V VE.Direct AU/NZ
Proven reliability
The full bridge with toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, filament lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. It will switch on and check every few seconds, adjustable, if the load has increased again.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
VE.Direct communication port for further configuration
The VE.Direct port can be connected to a computer (via VE.Direct to USB interface cable) or Apple and Android smartphones, tablets, MacBook’s and other devices (via VE.Direct Bluetooth Smart dongle) for further configuration and monitoring:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Monitoring: In and output voltage, % load and alarms
SKU 3161 Model # PIN121371300 Barcode # 8719076055013 Brand Victron Energy Shipping Weight 3.7500kg Shipping Width 0.300m Shipping Height 0.150m Shipping Length 0.210m Shipping Cubic 0.009450000m3 Unit Of Measure ea 
Victron Phoenix Inverter 12/1200 230V VE.Direct AU/NZ
Proven reliability
The full bridge with toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, filament lamps or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a preset value. It will switch on and check every few seconds, adjustable, if the load has increased again.
Remote on/off
A remote on/off switch can be connected to a two pole connector, or between battery plus and the left hand contact of the two pole connector.
VE.Direct communication port for further configuration
The VE.Direct port can be connected to a computer (via VE.Direct to USB interface cable) or Apple and Android smartphones, tablets, MacBook’s and other devices (via VE.Direct Bluetooth Smart dongle) for further configuration and monitoring:
- Low battery voltage alarm trip and reset levels
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage 210 – 245V
- Frequency 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Monitoring: In and output voltage, % load and alarms
SKU 3164 Model # PIN122121300 Barcode # 8719076054931 Brand Victron Energy Shipping Weight 8.0000kg Shipping Width 0.440m Shipping Height 0.190m Shipping Length 0.290m Shipping Cubic 0.024244000m3 
Victron Phoenix Inverter 12/1600 230V Smart
The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.
Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free Victron MK3-USB interface cable.
Other features available via Bluetooth and the VictronConnect app include;
- Switch the device on (normal or ECO) and off via Bluetooth.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
- Full monitoring system (Note that alarms and errors are only shown when the app is active).
- Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
- Share settings – share the current product settings with other products, using your device.
- Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
- Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.
Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.
Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.
Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Available models include 1600VA and 2000VA for 12, 24 or 48V systems and there are several optional connections available such as Remote on/off switch and Remote Control Panel.
Phoenix 1600VA – 3000VA specifications
SKU 3168 Model # PIN122160000 Barcode # 8719076042686 Brand Victron Energy Shipping Weight 13.7900kg Shipping Width 0.240m Shipping Height 0.300m Shipping Length 0.560m Shipping Cubic 0.040320000m3 
Victron Phoenix Inverter 12/3000 230V Smart
The same proven technology included in the Victron Phoenix range, powers the Victron Inverter Smart range.
Installation and configuration of the Smart Inverters using the inbuilt secure Bluetooth is seamless with the most common settings conveniently available on your smartphone, tablet or computer using the free VictronConnect app and VictronConnect user guide.
Other features available via Bluetooth and the VictronConnect app include;
- Switch the device on (normal or ECO) and off via Bluetooth.
- Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode.
- Full monitoring system (Note that alarms and errors are only shown when the app is active).
- Save product settings to a file so that they can be loaded onto the Victron product you are connected to …or another product, at a later time.
- Share settings – share the current product settings with other products, using your device.
- Firmware updates – an internet connection is not required as the latest firmware files are already loaded inside VictronConnect app, on your phone/tablet/laptop. When updating the app, all firmware files are automatically updated.
- Video Library – VictronConnect contains a library with demonstration settings for all the supported products. Discover the full capability of your product.
Weighing around 12kg the slimline construction, with accessible terminals and BlueTooth capabilities, means the inverter can be neatly installed in an out of the way place.
Powering your most common appliances the Phoenix Inverter Smart incorporates a toroidal transformer ensuring a reliable and efficient design with high surge capability. With pure sine-wave technology you are guaranteed cleaner power [closely resembling utility supplied electricity] which is ideal for efficiently powering electronics that use AC motors [refrigerators, compressors, and microwave ovens]. Audible and electrical noise is minimized. Power consumption is more efficient, and your appliances are protected against short-circuit, and overheating.
Peak Power capability [High-startup power] – around twice its ‘continuous’ rating ensures supply is adequate for high inrush loads such as power converters for LED lamps, halogen lamps or electric tools.
Available models include 1600VA and 2000VA for 12, 24 or 48V systems and there are several optional connections available such as Remote on/off switch and Remote Control Panel.
Phoenix 1600VA – 3000VA specifications
SKU 3170 Model # PIN122300000 Barcode # 8719076047360 Brand Victron Energy Shipping Weight 21.2800kg Shipping Width 0.620m Shipping Height 0.250m Shipping Length 0.350m Shipping Cubic 0.054250000m3 
Victron MultiPlus-II 24/5000/120-50 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off-grid as well as grid-connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
Multiplus II Specifications
SKU 3227 Model # PMP242505010 Barcode # 8719076052913 Brand Victron Energy Shipping Weight 35.0000kg Shipping Width 0.530m Shipping Height 0.440m Shipping Length 0.340m Shipping Cubic 0.079288000m3 
Victron Phoenix Inverter 24/800 230V VE.Direct AU/NZ
SKU 3179 Model # PIN241800300 Barcode # 8719076038436 Brand Victron Energy Shipping Weight 6.8000kg Shipping Width 0.350m Shipping Height 0.200m Shipping Length 0.280m Shipping Cubic 0.019600000m3 
Victron Phoenix Inverter 24/3000 230V Smart
SKU 3183 Model # PIN242300000 Barcode # 8719076047377 Brand Victron Energy Shipping Weight 20.6100kg Shipping Width 0.570m Shipping Height 0.250m Shipping Length 0.360m Shipping Cubic 0.051300000m3 
Victron Phoenix Inverter 24/5000 230V Smart
The Phoenix Inverter Smart is an efficient and reliable inverter. Built on Victrons’ proven and field tested Phoenix inverter platform, it now comes with a new slimmer design and full metal casing.
It’s powerful enough to supply most common plug in appliances in your car, boat, caravan, RV or home. A toroidal transformer provides a high peak power surge capacity, stable voltage, frequency and high quality sine-wave.
Installation is simpler than ever before with terminals now more accessible for the installer, enabling a more professional finish.Bluetooth is built-in, and makes setting up your high power inverter easier than ever before.
Configure alarms, alarm relay, voltage cut-off, output voltage, frequency, eco-mode and more, all from within VictronConnect.Phoenix Inverters Smart 5000VA Features:
Bluetooth built-in: fully configurable with a tablet or smartphone
- Low battery voltage alarm
- Low battery voltage cut-off and restart levels
- Dynamic cut-off: load dependent cut-off level
- Output voltage: 210 – 245V
- Frequency: 50 Hz or 60 Hz
- ECO mode on/off and ECO mode sense level
- Alarm relay
- Monitoring: In and output voltage, load and alarms
VE.Direct communication port – The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable needed) to configure and monitor the same parameters.
Proven reliability – The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power – Needed to start loads such as power converters for LED lamps, halogen lamps or electric tools
Remote on/off – A remote on/off switch or relay contact can be connected to a two pole connector. Alternatively, the H terminal (left) of the two pole connector can be switched to battery plus, or the L terminal (right) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example)
SKU 3184 Model # PIN242500000 Barcode # 8719076047933 Brand Victron Energy Shipping Weight 33.0000kg Shipping Width 0.250m Shipping Height 0.380m Shipping Length 0.690m Shipping Cubic 0.065550000m3 Unit Of Measure ea 
Victron Sun Inverter 24/250-10 IEC
The Sun Inverter combines a sinewave inverter and a PWM solar charger in one enclosure and is easy to install, with a minimum of wiring.
The inverter allows you to power domestic equipment – requiring 230V AC – using ‘leisure’ or ‘automotive’ batteries rated at 24V.
The solar charger ensures that the batteries are being charged by energy harvested from your solar panels. The charge algorithm is programmable.
The inverter and solar charger parameters can be read out via Bluetooth using the VictronConnect app. In addition to this, the inverter has a VE.Direct Port for connection to a GX device or GlobalLink 520 for system monitoring.
Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short circuit proof and protected against overheating, whether due to overload or high ambient temperature.
High start-up power
Needed to start loads such as power converters for LED lamps, halogen lamps, or electric tools.
ECO mode
When in ECO mode, the inverter will switch to standby when the load decreases below a pre-set value (min load: 15W). Once in standby, the inverter will switch on for a short period (adjustable, default: every 2,5 seconds). If the load exceeds a pre-set level, the inverter will remain on.
PWM solar charger
The solar charger ensures that the batteries are charged by energy harvested from your solar panels. The charge algorithm is programmable.
Bluetooth Enabled
The inverter and solar charger parameters can be read and monitored via Bluetooth using the VictronConnect app.
VE.Direct communication port
The VE.Direct Port can be used for connection to a GX device or GlobalLink 520 for system monitoring.
DC and PV connections with screw terminals
No special cable terminals or tools are needed for installation.
SUN INVERTER 24/250 Cont. power at 25°C (1) 250VA Cont. power at 25°C / 40°C 200W / 175W Peak power 400W AC output voltage / frequency (adjustable) 230Vac +/- 3%
50Hz or 60Hz +/- 0.1%DC input voltage range 18.4 – 34.0V DC low shut down (adjustable) 18.6V Dynamic (load dependent) DC low shut down Configurable via the “dynamic cut-off” setting DC low restart and alarm (adjustable) 21.8V Battery charged detect (adjustable) 28.0V Max. efficiency 88% Zero-load power 5.2W Default zero-load power in ECO mode (2) 1.3W Solar charger technology Pulse Width Modulation (PWM) Maximum PV voltage current and power 50V / 10A / 500W Solar panel type 72 cell solar panel or two 36 cell solar panels in series Charge voltages Adjustable and able to be temperature compensated (3) Protections (4) a – f Operating temperature range -40 to +65°C (fan assisted cooling) / Output power deration: 1.25% per °C above 40°C Humidity (non-condensing) max 95% Bluetooth wireless communication For remote monitoring and configuration VE.Direct communication port For remote monitoring and system integration ENCLOSURE Material & Colour Steel chassis and plastic cover (blue RAL 5012) Battery-connection Screw terminals Maximum cable cross-section 10mm² / AWG8 Standard AC outlet IEC-320 (male plug included) Protection category IP 21 Weight 2.4kg / 5.3lbs Dimensions (h x w x d) 86 x 165 x 260 mm / 3.4 x 6.5 x 10.2 inch ACCESSORIES Remote on-off Yes Automatic transfer switch Filax STANDARDS Safety EN-IEC 60335-1 / EN-IEC 62109-1 EMC EN 55014-1 / EN 55014-2 / IEC 61000-6-1 / IEC 61000-6-3 Automotive Directive ECE R10-4 EN 50498 (1) Nonlinear load, crest factor 3:1
(2) The default ECO mode retry interval is 2.5 s. The retry interval, stop power level, and start power level are adjustable.
(3) Temperature compensation via an optional ”Temperature sensor Quattro, MultiPlus and GX Device” or the “Smart Battery Sense”.(4) Protection key:
a) output short circuit
b) overload
c) battery voltage too high
d) battery voltage too low
e) temperature too high
f) DC ripple too highSKU 3166 Model # SIN241251100 Barcode # 8719076053705 Brand Victron Energy Shipping Weight 3.0000kg Shipping Width 0.160m Shipping Height 0.220m Shipping Length 0.310m Shipping Cubic 0.010912000m3 Unit Of Measure ea 
Victron EasySolar-II 48/5000/70-50 MPPT 250/100 GX
The EasySolar-II GX combines a MPPT Solar Charge Controller, an inverter/charger and control hub in one enclosure. The product is easy to install, with a minimum of wiring.
The all-in-one Solar Power Solution
The Victron EasySolar-II GX integrates the following elements:
- A MultiPlus-II 48/5000/70-50 inverter/charger
- A SmartSolar 250/100 MPPT -Tr solar charge controller
- A GX device with a 2 x 16-character display.
These elements come prewired together inside a single unit. This greatly simplifies most installations, saving time and money.
Display and Wi-Fi
The display reads battery, inverter and solar charge controller parameters.The same parameters can be accessed with a smartphone or other Wi-Fi enabled device.
In addition, Wi-Fi can be used to set up the system and to change settings.Solar Charge Controller
The DC output of the SmartSolar 250/100 MPPT is parallel wired with the DC connection of the MultiPlus-II inverter/charger.
The on/off mechanism of the MultiPlus-II also controls the SmartSolar MPPT.GX Device
The integrated GX device includes:
- A BMS-Can interface. This can be used to connect to a compatible CAN-bus managed battery. Note that this not a VE.Can compatible port.
- A USB port
- An Ethernet port
- A VE.Direct port
- The GX device controls the MultiPlus-II and the SmartSolar MPPT with respectively a VE.Bus and a VE.Direct connection.
The basics of using VE Configure
SKU 3259 Model # PMP482507010 Barcode # 8719076049333 Brand Victron Energy Shipping Weight 38.0000kg Shipping Width 0.660m Shipping Height 0.410m Shipping Length 0.350m Shipping Cubic 0.094710000m3 
Victron MultiPlus-II 48/3000/35-32 230V
Incorporating all the features of the MultiPlus inverter and charger combinations, the Multiplus II adds an external current sensor option to enable the PowerControl and PowerAssist functions to extend to 50A and 100A respectively. It can be used in off grid as well as grid connected PV and other alternative energy systems and is compatible with both solar charger controllers and grid-tie inverters. Added to this, with many countries approving the unit for ESS application this unit is able to feed back into the grid, any power excess to requirements.
Other features include:
- True sine wave inverter
- Adaptive charging
- Hybrid PowerAssist
- PowerControl
- Multiple system integration
PowerControl is a valuable feature, especially when handling limited power such as generator supply. When the Quattro draws significant current from the generator or shore side supply, set the maximum current limit on each AC input. Considering other loads, the Quattro adapts so that only surplus power is used for charging, thus preventing the generator or mains supply from being overloaded.
The PowerAssist feature will enable the device to supplement the incoming power with power from the battery. Any excess power is used for charging. It is therefore no longer necessary to size a generator on the maximum peak load. Use the most efficient size generator instead.
The advanced ‘adaptive charge’ software fine-tunes the three-stage automatic process to suit the battery condition and how the battery is being used, preventing damage and ensuring less maintenance is required. A fourth stage charge [also called the Storage mode] delivers a longer period of float charging. In addition, the Multiplus will charge a second battery using an independent trickle charge output.
Should there be a grid failure the UPS capability of the inverter is automatically activated. With some units having the ability to enable 6 Multis operating in parallel there is potentially close to uninterrupted and unlimited power.
If three phase power is required, then multiple units can be connected in parallel and configured with the combinations delivering up to 75KW/90 kVA inverter and more than 2000 Amps charging capacity.
Configuring parallel and three-phase systems is made simple with the Boat and Yacht Electrical System Upgrade
Caravan Electrical System Design
Product Video
The basics of using VE Configure
Multiplus II Specifications
SKU 3239 Model # PMP482305010 Barcode # 8719076047582 Brand Victron Energy Shipping Weight 20.4000kg Shipping Width 0.580m Shipping Height 0.240m Shipping Length 0.350m Shipping Cubic 0.048720000m3
