Your cart is currently empty!
Shipping class: Free Shipping
Free Shipping
Victron Orion-Tr Smart 24/24-12A (280W) Isolated DC-DC charger
The Orion-Tr Smart isolated DC-DC charger serves as a DC-DC battery charger or as a power supply (it is also designed for use
as a constant voltage source), offering a wide input and output voltage range. This is especially significant in the case of
vehicles with a Euro 5 or Euro 6 smart alternator, which often supplies too low charging voltage even when the engine is
running or when extended cable lengths, as is often the case in boats and RVs, lead to voltage drops. In such scenarios, precise
and controlled charging is imperative to fully charge the service battery while protecting the starter/input battery from
discharge.Bluetooth Smart enabled
- Any Bluetooth enabled smart phone, tablet or other device can be used to monitor, to change settings and to update the charger when new software features become available.
- Instant Readout: The VictronConnect App can display key data, including warnings and alarms, on the Device list page without the need to connect to the product.
Fully programmable
- Battery charge algorithm (configurable) or fixed output.
- Smart alternator compatibility: engine running detection mechanism.
Adaptive 3-stage charge algorithm: bulk – absorption – float
- For lead acid batteries it is important that during shallow discharges the absorption time is kept short in order to prevent overcharging of the battery. After a deep discharge the absorption time is automatically increased to make sure that the
battery is completely recharged. - For lithium batteries absorption time is fixed, default 2 hours.
- Alternatively, a fixed output voltage can be chosen.
Suitable for use in vehicles with a smart alternator (Euro 5 and Euro 6 engines)
The built-in engine shutdown detection will stop the converter when the engine is not running.
This prevents unwanted discharge of the starter battery (see manual for details).Remote on/off
A remote on/off switch or relay contact can be connected to a two-pole connector.
Alternatively, the H terminal (right) of the two-pole connector can be switched to battery plus, or the L terminal (left) of the two pole connector can be switched to battery minus (or the chassis of a vehicle, for example).All models are short circuit proof and can be paralleled to increase output current
An unlimited number of units can be connected in parallel.High temperature protected
The output current will reduce at high ambient temperature.IP43 protection
When installed with the screw terminals oriented downwards.Screw terminals
No special tools needed for installation.Input fuse (not replaceable)
Victron MIDI-fuse 80A/58V for 48V products (1 pc)
SKU 3819 Model # CIP133080010 Barcode # 8719076045984 Brand Victron Energy Shipping Weight 0.0060kg Shipping Width 0.150m Shipping Height 0.008m Shipping Length 0.100m Shipping Cubic 0.012000000m3 
Victron Battery Monitor BMV-712 Smart
The BMV-712 is the latest high precision battery monitor from Victron. The BMV-712 monitors voltage and current of a single battery bank and calculates power, state-of-charge and time-to-go. It also features an additional voltage input that can be used to measure an auxiliary or starter battery voltage, midpoint voltage or temperature with the optional temperature sensor. Data can be transferred to smartphones or computers with the inbuilt bluetooth module and external alarms can be triggered with the relay contact.
Installation is simply a case of connecting the supplied shunt in the negative battery cable, mounting the monitor in a 52mm diameter hole and connecting the wires. An optional wall enclosure is available if surface mounting is preferred.
Product Videos:
Introduction to the BMV-712 Smart
Sync settings for Lithium batteries – BMV-712 Smart
How to set up a Victron BMV Battery Monitor for lead and lithium batteries
Battery Monitor BMV-712 Smart Supply voltage range 6,5 – 70 VDC Current draw, back light off < 1mA Input voltage range, auxiliary battery 6,5 – 70 VDC Battery capacity (Ah) 1 – 9999 Ah Operating temperature range -40 +50°C (-40 – 120°F) Measures voltage of second battery, or
temperature, or midpointYes Temperature measurement range -20 +50°C VE.Direct communication port Yes Bistable relay 60V / 1A normally open (function can be inverted) RESOLUTION & ACCURACY (with a 500 A shunt) Current ± 0,01A Voltage ± 0,01V Amp hours ± 0,1 Ah State of charge (0 – 100%) ± 0,1% Time to go ± 1 min Temperature (0 – 50°C or 30 – 120°F) ± 1°C/°F Accuracy of current measurement ± 0,4% Accuracy of voltage measurement ± 0,3% INSTALLATION & DIMENSIONS Installation Flush mount Front 63mm diameter Front bezel 69 x 69mm (2.7 x 2.7 inch) Body diameter and depth 52mm (2.0 inch) and 31mm (1.2 inch) Protection category IP55 (not intended for outdoor use) STANDARDS Safety EN 60335-1 Emission / Immunity EN 55014-1 / EN 55014-2 Automotive ECE R10-4 / EN 50498 ACCESSORIES Shunt (included) 500A / 50mV Cables (included) 10 meter 6 core UTP with RJ12 connectors,
and cable with fuse for ‘+’ connectionTemperature sensor Optional (VIC.ASS000100000) SKU 3486 Model # BAM030712200R Barcode # 8719076049524 Brand Victron Energy Shipping Weight 1.0500kg Shipping Width 0.230m Shipping Height 0.280m Shipping Length 0.070m Shipping Cubic 0.045080000m3 Unit Of Measure kit 
Victron Busbar 250A 2P with 6 screws +cover
Victron Busbars 150, 250 & 600 Amps:
Victron busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
there are a number of busbars options with different current ratings, and a different number of connection terminals. Each busbar comes with a removable protection cover.Busbars are used to consolidate multiple wires or feed multiple circuits. Inserted moulded stainless steel studs eliminate the need for securing the nut and allow high torqueing for excellent electrical contact.
Raised bus provides easy access to multiple wires on a single base.
Mounting holes eliminate accidental shorts to aluminium and steel mounting surfaces.
They are also a neat and tidy, yet professional way of cleaning up your battery compartment so that don’t have as many cables on your battery terminals.
All models include a cover.Available models:
150A / 70V – 4 high current connections
150A / 70V – 6 high current connections
150A / 70A – 2P with 10 screws
150A / 70A – 2P with 20 screws
250A / 70V – 4 high current connections
250A / 70V – 6 high current connections
250A / 70A – 2P with 6 screws
250A / 70A – 2P with 12 screws
600A / 70V – 4 high current connections & 8 low current connections
600A / 70V – 8 high current connections & 8 low current connectionsFor more technical information and for the busbar dimensions see the datasheet.
Victron Busbar 600A 4P +cover
Victron Busbars 150, 250 & 600 Amps:
Victron busbars are used for high current distribution and at the same time they provide connections for batteries and/or DC equipment.
there are a number of busbars options with different current ratings, and a different number of connection terminals. Each busbar comes with a removable protection cover.Busbars are used to consolidate multiple wires or feed multiple circuits. Inserted moulded stainless steel studs eliminate the need for securing the nut and allow high torqueing for excellent electrical contact.
Raised bus provides easy access to multiple wires on a single base.
Mounting holes eliminate accidental shorts to aluminium and steel mounting surfaces.
They are also a neat and tidy, yet professional way of cleaning up your battery compartment so that don’t have as many cables on your battery terminals.
All models include a cover.Available models:
150A / 70V – 4 high current connections
150A / 70V – 6 high current connections
150A / 70A – 2P with 10 screws
150A / 70A – 2P with 20 screws
250A / 70V – 4 high current connections
250A / 70V – 6 high current connections
250A / 70A – 2P with 6 screws
250A / 70A – 2P with 12 screws
600A / 70V – 4 high current connections & 8 low current connections
600A / 70V – 8 high current connections & 8 low current connectionsFor more technical information and for the busbar dimensions see the datasheet.
Victron BlueSolar PWM-LCD&USB 12/24V-10A
Specification:
- Battery Voltage: 12/24 V with automatic system voltage detection
- Rated charge current: 10A
- Automatic load disconnect: Yes
- Maximum solar voltage: 28V / 55V
- Self-consumption: < 10 mA
- Load output: Manual control + low voltage disconnect +timer
- Protection: Battery reverse polarity (fuse), Output short circuit, Over temperature
- Grounding: Common positive
- Operating temp. range: -35 to +60°C (full load)
- Humidity (non-condensing): Max 95%
Victron 12V/100Ah AGM Super Cycle Batt. (M6)
This battery can ONLY be delivered to Business Premises only. Deliveries to residential properties is not available.
A new AGM battery: the AGM Super Cycle battery
A truly innovative battery
The AGM Super Cycle batteries are the result of recent battery electrochemistry developments. The paste of the positive plates is less sensitive to softening, even in case of repeated 100% discharge of the battery, and new additives to the electrolyte reduce sulfation in case of deep discharge.
Exceptional 100% depth of discharge (DoD) performance
Tests have shown that the Super Cycle battery does withstand at least three hundred 100% DoD cycles.
The tests consist of a daily discharge to 10,8V with I = 0,2C₂₀, followed by approximately two hours rest in discharged condition and then a recharge with I = 0,2C₂₀.
The two hours rest period in discharged condition will damage most batteries within 100 cycles, but not the Super Cycle battery.We recommend the Super Cycle battery for applications where an occasional discharge to 100% DoD, or frequent discharge to 60-80% DoD is expected.
Smaller and lighter
An additional advantage of the new chemistry is a slightly smaller size and less weight compared to standard deep cycle AGM batteries.
Low internal resistance
The internal resistance is also slightly lower compared to Victron and other manufacturers standard deep cycle AGM batteries.
Cycle life
Like any battery the further discharged and time between recharging back to full will highly affect battery life. The major benefit with the Super Cycle battery range allows you extend beyond the capabilities of a standard AGM battery when depth of discharge falls over the 50% and would start ending a standard AGM battery lifespan dramatically.
≥ 300 cycles @ 100% DoD (discharge to 10,8V with I = 0,2C₂₀, followed by approximately two hours rest in discharged condition, and then a recharge with I = 0,2C₂₀)
≥ 700 cycles @ 60% DoD (discharge during three hours with I = 0,2C₂₀, immediately followed by recharge at I = 0,2C₂₀)
≥ 1000 cycles @ 40% DoD (discharge during two hours with I = 0,2C₂₀, immediately followed by recharge at I = 0,2C₂₀)
12V/100Ah AGM Super Cycle Battery Specifications
- Volts: 12VDC
- Dimensions (l x w x h mm): 260 x 168 x 215
- Weight: 26KG
- CCA: 500
- Terminals: M6 Insert
- Warranty: 2 Years
SKU 3543 Model # BAT412110081 Barcode # 8719076039990 Brand Victron Energy Shipping Weight 27.0000kg Shipping Width 0.290m Shipping Height 0.250m Shipping Length 0.200m Shipping Cubic 0.014500000m3 
Victron Blue Smart IP65 Charger 6V/12V-1.1 230V AU/NZ Retail
Victron Blue Smart IP65 Battery Charger
The Blue Smart IP65 Charger is a professional battery charger packed with features such as built-in Bluetooth to the Victron Connect App (Available on both iOS and Android). The Blue Smart IP65 Battery Chargers are ideal for use on cars, camper vans, caravans, RV’s, tractors, motorcycles and boats and in the garage or on the farm.
Features:
- Water, dust and chemical resistant
- Seven step smart charge algorithm
- Potential recovery of fully discharged ‘dead’ batteries
- Automatic power supply function
- Severe cold performance: down to -30°C
- Several other battery life enhancing features
- Temperature compensated charging
- Low power mode to charge smaller batteries
- Li-ion battery mode
- Ultra high 95% efficiency “green” battery charger
- Setup and configure, readout of voltage and current by Bluetooth Smart
The battery is charged, smartly and to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance… and a longer life. Victron Blue Smart Chargers also feature a Storage Mode for less corrosion of the positive plates, typically most chargers only offer up to a float mode, the problem is that the lower float charge voltage that follows the absorption period will cause grid corrosion. It is therefore essential to reduce the charge voltage even further when the battery remains connected to the charger for more than 48 hours.
Recovery of deeply-discharged ‘dead’ batteries
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Connect the battery with ease with Quick Fit connection
The charger comes supplied with both alligator clips and M8 eyelets – making it easy to connect to the battery. If you wish, you can leave it permanently connected to your battery. Additional Quick Connects and Accessories are also available to purchase separately.
Check the status of your battery remotely
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. The VictronConnect app allows you to set up, readout and configure your Blue Smart IP65 Charger via your smartphone (Apple and Android). You can display the status of your charger and battery and even control the functions of your charger using the VictronConnect app. On your screen, the readout of voltage and current is default available.
Battery Reconditioning
A lead-acid battery that has been insufficiently charged or has been left discharged during days or weeks will deteriorate due to sulfation. If caught in time, sulfation can sometimes be partially reversed by charging the battery with a low current up to a higher voltage.
Blue Smart IP65 Charger
6 V/12 V – 1.1 A
Input voltage and frequency range 100 – 250VAC | 45 – 65Hz Efficiency 82% Minimum battery voltage Starts charging from down to 0 V Charge voltage ‘absorption’ Normal: 7.2 V | 14.4 V
High: 7.35 V | 14.7 V
Li-ion: 7.1 V | 14.2 VCharge voltage ‘float’ Normal: 6.9 V | 13.8 V
High: 6.9 V | 13.8 V
Li-ion: DisabledCharge voltage ‘storage’ Normal: 6.6 V | 13.2 V
High: 6.6 V | 13.2 V
Li-ion: 6.75 V | 13.5 VCharge current
Low current mode1.1A
0.5ATemperature compensation
(lead-acid batteries only)8 mV/°C | 16 mV/°C Back current drain 0.1 Ah/month (140uA) Protection Reverse polarity, output short circuit, Over temperature Operating temp. range -30 to +50°C
(full rated output up to 30°C)Humidity (non-condensing) Max 95% Charge algorithm 7-stage adaptive Bluetooth -4dBm, 2402 – 2480 MHz ENCLOSURE Battery-connection Black and red cable of 1.5 metre 230V AC-connection 1.5m cable with AS/NZS 3112 plug Protection category IP65 (splash and dustproof) Weight 0.4 kg Dimensions (h x w x d) 38 x 64 x 153 mm STANDARDS Safety EN 60335-1, EN 60335-2-29 Emission EN 55014-1, EN 61000-6-3, EN 61000-3-2 Immunity EN 55014-2,EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 SKU 3260 Model # BPC120134014R Barcode # 8719076055150 Brand Victron Energy Shipping Weight 0.7600kg Shipping Width 0.280m Shipping Height 0.050m Shipping Length 0.180m Shipping Cubic 0.025200000m3 Unit Of Measure ea
